85

[Scott]

Any mapping changes like that would need to be done in the edrum module. Or, you should look into Superior Drummer 3 that has MIDI learn capabilities for edrums.

Scott Sibley - Toontrack
Technical Advisor

[Scott]

Can you elaborate on what you mean by monitor the bleed? As in solo just the bleed? There isn’t a bleed solo facility but you can open a channel Mixer Property box and turn off the direct close mic (iow, open the snare mixer property box and move the direct snare slider down to turn it off). That will leave just the active bleed (if any).

Scott Sibley - Toontrack
Technical Advisor

1

Thanked by: Billy 86

[Scott]

So you’re saving the EZD2 project file with MIDI grooves on the Song Track? Like I say, unless you render your MIDI with the sound library loaded, your Song Track MIDI will play with whatever sounds library you load even from the save file.

If you want to keep the drum sound you have and then add other parts with a different kit, you need to either render the drums as a wav audio file, then import it into your DAW on an audio track, then you can load other kit sounds into EZD2, or, load 2 instances of EZD2 into your DAW and have 2 different kits loaded.

Scott Sibley - Toontrack
Technical Advisor

[Scott]

How are you “saving” the groove? Are you adding it to User MIDI in the Groove browser? Or are you rendering the Song Track as a wav file? If you are just saving as User MIDI, the sounds of the kit won’t be saved and doesn’t matter. MIDI contains no sound info, it’s just MIDI data. It will play whatever sound library you give it.

Scott Sibley - Toontrack
Technical Advisor

[Scott]

Ezkeys MIDI packs require an EZkeys sound library to work.

Scott Sibley - Toontrack
Technical Advisor

[Scott]

See if this thread helps

https://www.toontrack.com/forums/topic/midi-import/

Scott Sibley - Toontrack
Technical Advisor

[Scott]

Those are EZX expansion packs.

https://www.toontrack.com/product-category/ezdrummerline/ezx/

They are all separate purchases. Do you own some EZXs that aren’t showing on your library list?

Scott Sibley - Toontrack
Technical Advisor

[Scott]

You mean slap the same preset across the master bus and hope it works for 10 different songs? No, it won’t analyze the mix and automatically master it

Scott Sibley - Toontrack
Technical Advisor

[Scott]

Did you try running the latest update again?

Scott Sibley - Toontrack
Technical Advisor

[Scott]

Can you post a pic?

Scott Sibley - Toontrack
Technical Advisor

[Scott]

lore91 wrote:

thanks Scott do I have to do this procedure even if I want to install the software on my pc without connection?

so at the moment i downloaded the ez drummer2 file from the product manager on pc (A) then i put the zip file in a usb key and launched the program on pc (b) without connection to authorize offline. when launch occurs error 1330

 

your advice is to proceed download, install, authorize and update on the product manager and then transfer a second authorization to the offline pc.?

Reply To: Extraction and File Difficulty version: 2.1.8
Operating system: Windows 10

I have my pro studio machine offline except when running updates (like Product Manager). If you absolutely can’t go online and use the Product Manager on that computer, you’ll have to contact Toontrack Support directly with a fix for the Windows error. Contact them via the Contact Support button in the FAQ below. It may be simply a Windows 10 update needed. Most likely if the computer is not online or updated.

https://www.toontrack.com/faq/how-do-i-contact-support/

Scott Sibley - Toontrack
Technical Advisor

[Scott]

lore91 wrote:

Today I downloaded the EZDrummer 2 Folder and extracted it, i had a few fails but clicked skip.

Later on i clicked on the downloader and ticked and went on with it, then i discovered that when it was loading it said Error 1330, and it said that the file DATA.cabinet had an invalid signature, and at the very end it said Error 24592 was returned by WinVerifyTrust, any help, i got this for my birthday and im gutted thats I cant get it up and running like id of hoped, please help.

Reply To: Extraction and File Difficulty version: 2.1.8
Operating system: Windows 10

Please use the Toontrack Product Manager to download, install, and authorize your Toontrack product.

https://www.toontrack.com/product-manager/

Scott Sibley - Toontrack
Technical Advisor

[Scott]

Shopuff wrote:

psouza wrote:

Problem Solved. Tnks

Hi!

How did you solve the bad map MIDI?

I have an MPS-750X and my snare is triggering crash cymbals, and Bass Drum is triggering the Snare.

How do you remap this? Is in the software or in the E-Drum module?

Thanks in advance

• This post was modified 5 years ago by Shopuff.

Changing the MIDI mapping for EZD2 beyond the preset mappings available would need to be done in the edrum module.

Scott Sibley - Toontrack
Technical Advisor

[Scott]

EZD2 is an older code so my guess is it won’t be able to be coded to be resizable. Would be the next gen build (like S3 and EZbass).

Scott Sibley - Toontrack
Technical Advisor

[Scott]

Peter B. wrote:

Hello, I have also EZDrummer 1.4. Can I install this I have also installed EZDrummer 2. When yes, I can test my EZX Latin Percussion with my EZDrummer 1. I read, that all EZX function with EZDrummer 1.4 also!? Musician greetings Peter Bengelmann

Reply To: I still use EZ Drummer 1, all the expansion pacs now say EZ 2, can I use them? version: 1.4.0
Operating system: Windows 10

No you can’t go backwards and install EZD 1.4 over EZD2. The Latin Percussion EZX is compatible with EZD 1.4 and EZD2.

Scott Sibley - Toontrack
Technical Advisor

[Author]

Replies