[brammer]

No complaints Vince
 
Just pointing out that for those of us that have a fair bit of TT stuff, there wasnt that much to attract me to purchase the November Metal releases.
 
I love the TT stuff in general and support them strongly, I am sure the owners would acknowledge that from my Registered Products list , but I am just letting them know that if they produce some more quality metal sample packs then they will definitely get even more of my ( and I assume others ) dollars , which I am more than happy to thow thier way for the right product.
 
Regards all
 
Wotto
Australia
 
 

" Up The Irons ,58,0,2010-03-07 02:52:33.423,0,NULL,brainsnap@kooee.com.au
170917,brainsoup,,,0,0,2010-04-19 01:38:02.000,NULL,NULL,brainsoup@inorbit.com
276216,jeebustrain,,,0,0,2011-11-29 01:02:11.000,NULL,NULL,brainstem@gmail.com
19297,brainstem3000,,,0,0,2007-04-24 17:37:18.637,0,NULL,brainstem3000@yahoo.com
295070,brainstem9,,,0,0,2012-03

[brammer]

Many Thanks 

" Up The Irons ,58,0,2010-03-07 02:52:33.423,0,NULL,brainsnap@kooee.com.au
170917,brainsoup,,,0,0,2010-04-19 01:38:02.000,NULL,NULL,brainsoup@inorbit.com
276216,jeebustrain,,,0,0,2011-11-29 01:02:11.000,NULL,NULL,brainstem@gmail.com
19297,brainstem3000,,,0,0,2007-04-24 17:37:18.637,0,NULL,brainstem3000@yahoo.com
295070,brainstem9,,,0,0,2012-03

[brammer]

ORIGINAL: santa claus

So, Andy Sneap presets, eh? On the headphones I have available here, it sounded a bit cardboardish (and the sound of all example tracks very similar), but there is probably some good stuff there.

I would say you need to spend more than $5.00 on your headphones then – and listen again

" Up The Irons ,58,0,2010-03-07 02:52:33.423,0,NULL,brainsnap@kooee.com.au
170917,brainsoup,,,0,0,2010-04-19 01:38:02.000,NULL,NULL,brainsoup@inorbit.com
276216,jeebustrain,,,0,0,2011-11-29 01:02:11.000,NULL,NULL,brainstem@gmail.com
19297,brainstem3000,,,0,0,2007-04-24 17:37:18.637,0,NULL,brainstem3000@yahoo.com
295070,brainstem9,,,0,0,2012-03

[brammer]

Thanks all,
 
I kind of got this together last night a little better.
I re-learnt the HatsTrig and HatstipTrig and then went to the mapping page and played around with the velocity settings for each articulation.
It’s a LOT better than what I had it the other night and is not triggering strange sounds anymore.
 
I saved my map as a user Preset and have been able to successfully load my settings into any kit I dial up from any expansion pack.
 
So far so good.
 
Thanks again everyone
 
 
Wotto

" Up The Irons ,58,0,2010-03-07 02:52:33.423,0,NULL,brainsnap@kooee.com.au
170917,brainsoup,,,0,0,2010-04-19 01:38:02.000,NULL,NULL,brainsoup@inorbit.com
276216,jeebustrain,,,0,0,2011-11-29 01:02:11.000,NULL,NULL,brainstem@gmail.com
19297,brainstem3000,,,0,0,2007-04-24 17:37:18.637,0,NULL,brainstem3000@yahoo.com
295070,brainstem9,,,0,0,2012-03

[brammer]

Yeah I know John – I ALWAYS get the crazy issues mate – I do have the Latin Percussion Addon pack installed so maybe SOMEHOW its grabbing from that.

I did reset the module tonight and it DEFINITELY does not map straight from / to the DTX900.
Its the same issues as described earlier, so I guess I will map manually and save as a preset?

Hope I can work out this hat issue but

" Up The Irons ,58,0,2010-03-07 02:52:33.423,0,NULL,brainsnap@kooee.com.au
170917,brainsoup,,,0,0,2010-04-19 01:38:02.000,NULL,NULL,brainsoup@inorbit.com
276216,jeebustrain,,,0,0,2011-11-29 01:02:11.000,NULL,NULL,brainstem@gmail.com
19297,brainstem3000,,,0,0,2007-04-24 17:37:18.637,0,NULL,brainstem3000@yahoo.com
295070,brainstem9,,,0,0,2012-03

[brammer]

Hi Wiz,
 
Yeah it must?
The ONLY thing I have done to my module is to copy Preset Kit 1 to User Kit 1 and rename it.
Other than that – no changes to my module.
 
To make 100% sure I am more than happy to reset the module and try the SD2.0 mapping preset again and report back.

" Up The Irons ,58,0,2010-03-07 02:52:33.423,0,NULL,brainsnap@kooee.com.au
170917,brainsoup,,,0,0,2010-04-19 01:38:02.000,NULL,NULL,brainsoup@inorbit.com
276216,jeebustrain,,,0,0,2011-11-29 01:02:11.000,NULL,NULL,brainstem@gmail.com
19297,brainstem3000,,,0,0,2007-04-24 17:37:18.637,0,NULL,brainstem3000@yahoo.com
295070,brainstem9,,,0,0,2012-03

[brammer]

Thanks for that Wiz.
 
Now that I have watched that I realise that I have actually done that ( numerous times in frustration ) and it doesn’t work for me.
It puts a conga/bongo sound on my hat edge and doesn’t allocate ANY sounds to my main 2 cymbals at all.
 
The Kick, all toms and the snare are fine though.
 
THAT’S why I started then doing all the individual articulations.

" Up The Irons ,58,0,2010-03-07 02:52:33.423,0,NULL,brainsnap@kooee.com.au
170917,brainsoup,,,0,0,2010-04-19 01:38:02.000,NULL,NULL,brainsoup@inorbit.com
276216,jeebustrain,,,0,0,2011-11-29 01:02:11.000,NULL,NULL,brainstem@gmail.com
19297,brainstem3000,,,0,0,2007-04-24 17:37:18.637,0,NULL,brainstem3000@yahoo.com
295070,brainstem9,,,0,0,2012-03

[brammer]

Thanks Wiz,
 
No I haven’t done that.
Maybe I should huh as I guess that is also what John was indicating.
 
Sorry, as you can tell by my post count I am very fresh to this and finding it is a STEEP learning curve.
I appreciate all reply’s and apologise for any ignorance at this early stage.

" Up The Irons ,58,0,2010-03-07 02:52:33.423,0,NULL,brainsnap@kooee.com.au
170917,brainsoup,,,0,0,2010-04-19 01:38:02.000,NULL,NULL,brainsoup@inorbit.com
276216,jeebustrain,,,0,0,2011-11-29 01:02:11.000,NULL,NULL,brainstem@gmail.com
19297,brainstem3000,,,0,0,2007-04-24 17:37:18.637,0,NULL,brainstem3000@yahoo.com
295070,brainstem9,,,0,0,2012-03

[brammer]

John – thanks for your reply…
Clearly – It would appear that I have no idea then
 
 
OK – so last night I removed ALL the ‘other’ articulations on the hats / completely emptied the hats of all sounds and then I did this…..
 
I selected ‘HatsTrig’ articulation, I highlighted edit articulation only’ and ‘learnt’ the EDGE of my hat in a CLOSED position, and then also learnt the EDGE of my hats in a CLOSED position.
 
I selected ‘HatstipTrig’ articulation, I highlighted edit articulation only’ and ‘learnt’ the BOW of my hat in a CLOSED position, and then also learnt the BOW of my hats in a CLOSED position.
 
After this the hats DID seem to operate a whole lot better but (although I am still unsure if I did what you meant me to do) but I now have these issues……
 
* My foot closed chik sound is VERY low
* My OPEN hats sounds are VERY loud
 
Any further assistance is/ will be appreciated

" Up The Irons ,58,0,2010-03-07 02:52:33.423,0,NULL,brainsnap@kooee.com.au
170917,brainsoup,,,0,0,2010-04-19 01:38:02.000,NULL,NULL,brainsoup@inorbit.com
276216,jeebustrain,,,0,0,2011-11-29 01:02:11.000,NULL,NULL,brainstem@gmail.com
19297,brainstem3000,,,0,0,2007-04-24 17:37:18.637,0,NULL,brainstem3000@yahoo.com
295070,brainstem9,,,0,0,2012-03

[brammer]

ORIGINAL: Rogue
can you be more specific about the info you need regarding swells?

Thanks Rogue,

Ok I am trying to ‘lose’ that initial hard hit sound when you strike the cymbal constantly ( ride the edge as you would in an acoustic situation ) to create that ‘continual’ sound WITHOUT hearing each individual hit as well as the constant swell sound running ( gee I hope this makes sense as I am hopeless at explaining things  )

I am triggering SD2.0 (with 2.2 updates installed ) via a Yamaha DT4Express module and using PCY135 3 zone cymbals.

Unsure if this helps further…

" Up The Irons ,58,0,2010-03-07 02:52:33.423,0,NULL,brainsnap@kooee.com.au
170917,brainsoup,,,0,0,2010-04-19 01:38:02.000,NULL,NULL,brainsoup@inorbit.com
276216,jeebustrain,,,0,0,2011-11-29 01:02:11.000,NULL,NULL,brainstem@gmail.com
19297,brainstem3000,,,0,0,2007-04-24 17:37:18.637,0,NULL,brainstem3000@yahoo.com
295070,brainstem9,,,0,0,2012-03

[brammer]

I have been advised that there is info about this at Youtube in the ‘loads’ of videos on SD available there.
 
I certainly cant see it.
 
Can anyone point me to those video’s at least
Specifically the one that covers swells

" Up The Irons ,58,0,2010-03-07 02:52:33.423,0,NULL,brainsnap@kooee.com.au
170917,brainsoup,,,0,0,2010-04-19 01:38:02.000,NULL,NULL,brainsoup@inorbit.com
276216,jeebustrain,,,0,0,2011-11-29 01:02:11.000,NULL,NULL,brainstem@gmail.com
19297,brainstem3000,,,0,0,2007-04-24 17:37:18.637,0,NULL,brainstem3000@yahoo.com
295070,brainstem9,,,0,0,2012-03

[brammer]

Arrr – I feel the love guys

" Up The Irons ,58,0,2010-03-07 02:52:33.423,0,NULL,brainsnap@kooee.com.au
170917,brainsoup,,,0,0,2010-04-19 01:38:02.000,NULL,NULL,brainsoup@inorbit.com
276216,jeebustrain,,,0,0,2011-11-29 01:02:11.000,NULL,NULL,brainstem@gmail.com
19297,brainstem3000,,,0,0,2007-04-24 17:37:18.637,0,NULL,brainstem3000@yahoo.com
295070,brainstem9,,,0,0,2012-03

[brammer]

So…..no-one here creates Swells and uses this with an Ekit

" Up The Irons ,58,0,2010-03-07 02:52:33.423,0,NULL,brainsnap@kooee.com.au
170917,brainsoup,,,0,0,2010-04-19 01:38:02.000,NULL,NULL,brainsoup@inorbit.com
276216,jeebustrain,,,0,0,2011-11-29 01:02:11.000,NULL,NULL,brainstem@gmail.com
19297,brainstem3000,,,0,0,2007-04-24 17:37:18.637,0,NULL,brainstem3000@yahoo.com
295070,brainstem9,,,0,0,2012-03

[brammer]

Well apparently my good old DT4Express does not send aftertouch signals
So there goes the ‘choking’ plans I guess.
Will sort out when I get the DTX950 ( shortly?)
 
But I still need ‘swell’ assistance please

" Up The Irons ,58,0,2010-03-07 02:52:33.423,0,NULL,brainsnap@kooee.com.au
170917,brainsoup,,,0,0,2010-04-19 01:38:02.000,NULL,NULL,brainsoup@inorbit.com
276216,jeebustrain,,,0,0,2011-11-29 01:02:11.000,NULL,NULL,brainstem@gmail.com
19297,brainstem3000,,,0,0,2007-04-24 17:37:18.637,0,NULL,brainstem3000@yahoo.com
295070,brainstem9,,,0,0,2012-03

[Author]

Replies