my acoustic to electronic conversion, help needed.

[BladeLawless]

ok here is my set up… I have a 5 piece Yamaha Rydeen which I have converted the shells to electronic with mesh skins, piezos for sensors, single sensor on the Bass drum and dual sensors for the two Rack Toms and Floor Tom (centre and rim). Hihat, Cymbals and Ride are from a company called Field http://www.fieldelectronicdrums.com/ and are as follows:

hh-1u 14″ Universal Hi Hat – Dual Zone, mounted on a standard acoustic hihat stand using a Pintech HHC RYC hihat controller

18″ Ride – Dual zone – 18″ Ride – Dual zone with choke

16″ Crash – Dual zone – 16″ Crashes – Dual zone with choke

14″ Crash – Dual zone – Dual zone with choke

module is Alesis Trigger I/O

software is Toontrack EZDrummer

I need to know how to set up the Alesis I/O and EZDrummer’s drum map to make sure that all my cymbal dual zones and chokes are working and my snare and toms centre and rim shots are all working.

Thanks in advance.

Topic