[Timothy McKevlin]

Hi RVan. That’s the way I understood it. Since my issue was resolved, I didn’t actually need to try this. Hopefully it will help you with your situation.

[Timothy McKevlin]

Hi RVan. I’m afraid I’m not going to be much help here. The issue seems to have corrected itself! I don’t know how or why. However, I did receive the following answer from Yamaha. I didn’t need it after all, but maybe it will help you:

Make sure both zones have the same MIDI note assignment

1) Press the [Menu] button
2) Turn dial to select [KIT]
3) Press the Enter button (knob)
4) Use dial to select [MIDI]
5) Press Enter button (knob)
6) Highlight [Assign]
7) Press Enter (knob)
8) Turn dial (knob) to select ‘Note’
9) Press Enter (knob)
10) Strike the Hi Hat zone
11) Turn dial/knob to set desired MIDI note
12) Strike other zone (bow)
13) Turn dial/knob to set to same MIDI note as previous zone (edge)
14) Repeat steps 10-13 for same zones, while hat is closed.
15) Press [Store] button
16) Press Enter/knob to save

[Timothy McKevlin]

Perfect, thanks very much, John.

[Timothy McKevlin]

Thanks for replying, John. I can’t explain how or why, but my problem solved itself! Now I just need to reduce all the crackle sounds I’m hearing. Probably a sample rate or bit depth issue. I’m going to experiment with some different settings. Thanks again.

[Author]

Replies