[RVan]

John wrote:

Most important – there is no CC data at all, which is need for opening and closing the hihat. Is there a setting in the module for turning this ON/OFF?

I’m not sure where I’d find information on CC, when set manually it can tell the difference between the pedal being down or up (sends different notes), but it can’t blend between the two states. Unless that is what CC does? I imagine its not a voicing, would that be more of a general setting or is it specific to the pedal? What does CC stand for exactly to help me better search for it?

• This post was modified 6 years, 6 months ago by RVan.

[RVan]

John wrote:

Hi,

can you record some MIDI, ZIP and attach it to a post here? Either separate MIDI or an FL Studio Project.

BR,

John

Hi John

 

So here is a Midi and I also included a .txt file of the zones I was hitting on the pad while recording. This is factory settings. There is no crossover but you can hear the issue immediately during the second half. I also threw in an mp3 of what I hear when playing with the kit.

 

Hope this helps!

[RVan]

John wrote:

RVan:

You are triggering the Seq hit (65) now instead of the Edge Trig (18) or Tip Trig (20) and that will not work.

I suspect that your module has completely different trigger notes by Default though, so my recommendation would be to take notes on what tweaks you have done to adjust to your playing and perform a Factory Reset. This will reset note values so the correct notes should be sent to EZDrummer 2.

BR,

John

The note changes saved as a new kit preset within the module and I am able to return back to factory kits at any time freely, and the same issue occurs.

 

A factory reset returns me back to this issue: https://www.toontrack.com/forums/topic/everything-works-except-closed-hh-sounds-yamaha-dtx522k/ (which I saw your reply, I will be doing that shortly!)

[RVan]

While it was cumbersome, the good news is it worked! Or is at least workable, thank you. Your instructions didn’t transfer well to my version of drums but it got me looking around until I found similar options.

 

Writing how to fix it for anyone who may stumble across this:

 

(On the 502 module)

Hold shift and hit menu

Wheel over to kitvoicing

play the closed hat (or any sound pad want remapped really) and you should see it appear at the title

scroll over with > until you see “note”, put 65 (F3), which in my case is the sound I wanted for the closed HH hit

Save as a new custom kit, and always use this kit when playing into midi

 

 

The downside is now I have a hot and cold pedal, going from closed to fully open with no taper in between, but I guess it will have to do for now.

[RVan]

Thank you tmckev, I didn’t know this was possible.

 

I am assuming I assign these to the notes shown in EZD when you expand the midi details on the hat?

[RVan]

I’m getting the same issue on a DTX522K (More info: https://www.toontrack.com/forums/topic/everything-works-except-closed-hh-sounds-yamaha-dtx522k/)

[RVan]

Did you ever find a solution to this? Exact same issue on a DTX522

[Author]

Replies