motu mk5 ultralite with SP3

[Zachb36]

Does anyone know how to get outputs working properly with SP3 and the motu mk5 ultralite? I can’t figure it out for the life of me. I’m trying to output 1-5 outputs:

1. Drums
2. Snares
3. Toms
4. Cymbals
5. Ambiance/Crunch/etc.

I’m outputting these mono on each 1/4th out into a direction box to my stage box. But I can’t get the drums or snare to output properly at all through Aux out 1 and 2. In Superior Drummer, it doesn’t let you output to a mono, so I have to output and pan.

Any advice would be greatly appreciated.

Operating system: macOS Tahoe (26)

• This post was modified 3 months, 3 weeks ago by Zachb36.

Topic

[drumjack52]

Did you do the setup in CueMix 5? And don’t forget to use multi-channel out for the SD3 mixer.

Jack
aka musicman691 on other forums
Superior Drummer 3.4.1
Area 33 1.0.0
Death and Darkness 1.0.1
PT 2021.6
OSX 10.13.6
3.46 GHz hex core 2012 MacPro 48 gig ram

[Zachb36]

drumjack52 wrote:

Did you do the setup in CueMix 5? And don’t forget to use multi-channel out for the SD3 mixer.

Yeah, cumix is set up, but how am I supposed to set this up in SD3?

 

I have:

1. Kick (stereo) outs 1 and 2 on the mk5
2. Snare (Stereo) outs 3 and 4 on the mk5
3. Toms (Stereo) outs 5 and 6 on the mk5
4. Cymbals (Stereo) outs 7 and 8 on the mk5
5. Ambiance/Crunch (Stereo) outs 9 and 10 on the mk5

I don’t NEED kick in stereo, so I can free that line up if I can get this figured out.

[Zachb36]

I can’t figure out if the outs should be like this, or if I should have line 3 and 4 together, etc.

 

[Zachb36]

Here is what each mix is cuemix 5 is set up like.

 

[drumjack52]

Zachb36 wrote:

drumjack52 wrote:

Did you do the setup in CueMix 5? And don’t forget to use multi-channel out for the SD3 mixer.

Yeah, cumix is set up, but how am I supposed to set this up in SD3?

 

I have:

1. Kick (stereo) outs 1 and 2 on the mk5
2. Snare (Stereo) outs 3 and 4 on the mk5
3. Toms (Stereo) outs 5 and 6 on the mk5
4. Cymbals (Stereo) outs 7 and 8 on the mk5
5. Ambiance/Crunch (Stereo) outs 9 and 10 on the mk5

I don’t NEED kick in stereo, so I can free that line up if I can get this figured out.

Even with the SD3 mixer set to multi-channel it’s output is always on the main output (channels 1/2) of SD3. That gets routed to channels 1/2 of Cuemix. Then back in the SD3 mixer you route the snare to channels 3/4 output of SD3, and so on for the rest of the discrete outputs you want to feed to Cuemix. I suggest reading the manual that comes with Cuemix for further help. Or ask for help over on the Motunation forum.

Jack
aka musicman691 on other forums
Superior Drummer 3.4.1
Area 33 1.0.0
Death and Darkness 1.0.1
PT 2021.6
OSX 10.13.6
3.46 GHz hex core 2012 MacPro 48 gig ram

[Zachb36]

I got it working, thanks!

[Author]

Replies