No products in the cart.
Good Morning.
Having an issue with EZDrummer 2 and Ableton and multi channel setup. I put EZDrummer 2 on a MIDI track (Modern / Basic kit), go into the mixer and choose multichannel. I then create several Audio tracks to handle the outputs. The kick sounds on the MIDI channel (as expected), the snare is routed to Audio Track 2 and it’s sound is isolated only to Audio Track 2 (as expected). However – if the kick is hit, the sound is also coming over the snare Audio Track 2. I have the hi-hat set to Audio Track 4 and it is isolated to that track (as expected). The toms are set to Audio Track 5, but the sound is showing in Audio Track 2 as well as Audio Track 5. Open hi-hat is set to Audio Track 6 and the sound is isolated there (as expected) but kicks and toms show up there as well as the snare track (Audio Track 2). Am I missing a step somewhere? I have seen videos on YT for setup and feel I am setting this up correctly – any ideas?
TIA for any feedback!
mr_melvis
Hello,
could it be the bleed- and/or amb knobs in the mixer?
Greetings
Dirk
1
Thanked by: Todd MavisApparently it was bleed over from the mic placement on each drum – Toontrack support was VERY helpful in troubleshooting the issue and explaining why it was happening…
Thanks for jumping in and offering your input – much appreciated!
1
Thanked by: ApparatusHello I’ve got a question.
Do you hear clicks and plops if you use the EZ drummer 2 app? My specs:
I’ve bought the seveties rock EZX and the UK Pop.
There is krackling and plops if I use anything else but the ‘original mix ‘ setting from the EZX.
My buffersize (latency) is at 256 on my RME multiface soundcard.
Greetings
Dirk
The only suggestion I would have is to increase the buffer size a little at a time to see if the clicks and pops go away after each tweak. Also – are you using ASIO for the soundcard – I am not familiar with RME?
Hello Todd,
nice to hear from you.
My buffersize is 256. If i use 128, it’s nothing but plops and clicks, cracks. If I use 516, the latency is too much to play the e-drums. If I use the original mix from the EZX presets, it’s ok. I use ASIO. Never had any problems with the soundcard. I use to record my acoustic drumset live with mics, usually 7 or 8 mics with this soundcard. No problems.
I’ve just finished 2 music video’s with adobe premiere CS5 with no problems, so I don’t understand what’s going on. The support of Toontrack can’t help me either. The tested the EZX seventies rock punky Arnold preset (all crackel when I use this one) with no problems..
I guess I will be “bouncing around” a lot..
Greetings
Dirk
Hello Tod,
I saw you also use windows 10 so just to let you know, problem solved. It’s windows 10 in the poweroptions:
Hello there,
I happen to have the exact same problem, but unlike you I can’t get it to work. I know this is an older thread, but maybe you could tell me/us a little more about the solution you came to with the assistance of the Toontrack peeps? Would be greatly appreciated!
Thanks in advance!
Hello – not sure which issue you are talking about – can you elaborate with details of what you are trying to do?
No products in the cart.