Audio Sender Not Connected

[Point.blank]

Hello,

I use Cakewalk by Bandlab.

I want to record my guitar on to a track in Cakewalk and then convert it to a bassline in EZBass.

I have called it Guitar Input

I have put an instance of Audio Sender on the track.

Here is what I see:

In the Audio Sender window there is a message “Not Sending” and the icon to the right of that has a line through it

The icon resembles the normal one you see in the computer taskbar indicating you are connected to your router.

Below that is a line that is cut in half by an X and a message “Not Connected”

When I play the guitar the meter in Audio Sender responds i.e. it detects signal coming in.

When I open the EZBass “Audio Tracker” tab  the Input Box has “None”

When I press the dropdown button here the only entry is “None” with a tick by it.

Thank you for any help you can give me

EZbass version: 1.1.3
Operating system: Windows 10

Topic

[Victor Kennedy]

Hello,

I’m just another EzBass user, and am having a lot of problems with getting it to recognise
Tempo changes within a song.

However I think I see your problem ~ You don’t use Audio Sender to actually Play the Guitar INTO Audio Track ~ You record the Guitar (or Bass-whatever) into your DAW, then put Audio Sender as the FIRST plugin on that recorded track, then you can open EzB, Audio Tracker, at the bottom there’s a box to tell it where to get the Audio from, in your case the track is labelled as Guitar Input, so in AT select that as it’s input, and press Play in your DAW. EzB will record that Guitar into AT and the you carry on from there.

Also you can just drag the recorded Guitar file into Audio Tracker and tell it if your converting Bass Audio or Guitar Audio etc.

Hope this helps you…

MacBook Air M3 OSX 14.7.2 | Logic Pro | Toontrack EZDrummer 3 | Tootrack EzBass | M-Audio AIR 192-14 | Schecter, Maton, Fender, DBZ & Epiphone Electric and Acoustic Guitars |

1

Thanked by: Point.blank

[Point.blank]

Hi Victor,

Thank you for your reply, I appreciate it.

I did try what you said.

I put some audio in a spare track labelled sss

I put TT AudioSender as the only insert on that track.

However, in EZBass, sss does not appear in the dropdown (still just says none).

Also, the last video I watched showed that you can set up the AudioSender and EZBass first, and then record your audio into your DAW.

Thank you for your help.

EZbass version: 1.1.3
Operating system: Windows 10

[Olof Hermansson]

A reason for this could be that you are using an older version than 1.1.0 of either the Audio Sender or EZbass. EZbass 1.1.0-1.1.3 requires Audio Sender 1.1.0. Have you ever moved or copied these plug-ins after installation?

Olof Hermansson - Toontrack
Coder

1

Thanked by: Point.blank

[Point.blank]

Hi Olaf,

I updated Audio Sender to the newer version and it works now!

Thank you for your help.

EZbass version: 1.1.3
Operating system: Windows 10

[Claudio Porcellana]

I have the same problem but in Bitwig Studio only; with Ableton I had zero problems up to a week ago when I switched from Live to Bitwig

EZbass version: 1.1.6
Operating system: Windows 10

[CT]

You still having issue with Bitwig? Mine isn’t working also. Worked in Live from what I remember as well.

[Claudio Porcellana]

Yes, I still have issue with Bitwig, so I don’t use Audio Sender any more

EZbass version: 1.1.7
Operating system: Windows 10

[Olof Hermansson]

I believe there is an option in Bitwig to have plug-ins in separate processes. EZbass and Audio Sender need to be in the same process to see each other.

Olof Hermansson - Toontrack
Coder

[Claudio Porcellana]

Sure, I know that

Unfortunately, no option of the few available worked

[MOOSIQUE]

Same problem here with TT Audio sender.

Ableton / Mac OS Sequoia / EZ Bass

Cannot connect Audio Sender and EZ Bass. Put Audio sender on audio Track and EZ Bass on another. Both VST3. When trying to record, EZ Bass shows you the recording setup page (that unfortunately cannot clicked off). Following the instructions does not help. Have not found any answer on this so far. Would appreciate if someone who knows shared the how-to.

EZbass version: 1.3.2
Operating system: macOS Sequoia (15)

[John]

Hi,

please see:

BR,
John

John Rammelt - Toontrack
Technical Advisor

[Author]

Replies