[theleavitt]

I experienced the same exact issue. The work around I found for this is to change the Midi Mapping within the SD600 module. The instructions are on page 24 of the SD 600 manual. https://simmonsdrums.net/app/uploads/manuals/Simmons_SD600_Manual.pdf

Basically you click on the utilities button and then click the edit button until the midi note screen pops up. Then you press the “+” &”-” buttons to map the midi note that you want for the corresponding sound.  I just cycled thru the MIDI notes until I found ones that seemed to correlate to EZ drummer well enough. The hihat settings that worked for me were below as follows

pedal click:HH_P = midi note 44,

closed: HH_C = midi note 61,

half open: HH_H = midi note 46,

fully open:HH_O=midi note 121

These midi notes gave me what I found to be the best results.

hope that helps.

Reply To: Mapping MIDI notes in EZ Drummer to work with Simmons SD600 Kit version: 2.1.8
Operating system: Windows 10

• This post was modified 5 years, 5 months ago by theleavitt.
  Reason: the pdf linked is on page 24 but my physical manaul is page 26

[Author]

Replies