5

[Shootie]

EZBass (all toontrack products) export as stereo. There is no way to make it mono on export. If it’s a DI sound, just split the stereo file and keep one of the files.

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

[Shootie]

Just a few EZXs have 2 snare slots. The latest Fusion EZX for example. Using two instances isn’t tedious if you route the midi from one instance to another.

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

1

Thanked by: confundido

[Shootie]

Enjoy

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

[Shootie]

If you have the Legacy Focusrite software working like in your screens hot. Look in the lower left where it says Loopback. Under it you can change it to Custom Mix to trigger the virtual Mixer. It’s helpful if you want to use the inputs & outputs of the 4i4 at the same time. Also, Loopback outputs are not available until you activate them in the Task Bar. This might be what’s setting you back.

Once you get the Loopback outputs and the virtual mixer, you’ll be able to figure it out from there I bet.

If this doesn’t work for you, apologies. No time to read all of the responses. Should be really easy unless you’ve configured your system in a way that’s preventing the loopback driver from appearing.

Best of luck.

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

[Shootie]

Look for the Tempo menu near the top of the Grooves Tab. Make sure it says 1xDefault Tempo. Not sure otherwise.

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

[Shootie]

Mick’s recommendation works. Drag an audio file on top of an instrument in EZDrummer.

If you need both cowbells to have real velocity, you’d buy an EZX that has a cowbell kit instrument, Big Stage EZX for example. Now you have two cowbell slots.

Or you use two instances of EZDrummer at the same time in a DAW.

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

2

Thanked by: Bear-Faced Cow and Scott Eshleman

[Shootie]

If you’re on 4i4 3rd generation or above. The 4i4 comes with it’s own virtual mixer. The feature is called Loopback. The manual/videos should cover it. When enabled, it will allow a different audio source for OBS to find. Not sure about Win10 capability.

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

[Shootie]

Maybe this?

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

[Shootie]

BEST ANSWER

It’s as you’ve said it. It’s referring to the stick. Edge is the Shank (side) of the stick.

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

It’s as you’ve said it. It’s referring to the stick. Edge is the Shank (side) of the stick.

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

1

Thanked by: Christopher Day

[Shootie]

Some generic audio setup info here.

Feel free to share whether you’re new to edrumming. Your computer specs. Whether you use an audio interface or not.

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

[Shootie]

Right Click on a Groove in your Song Track > Find > Select Containing Folder.

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

3

Thanked by: TigerTheFrog, jazzmandan and Scott Eshleman

[Shootie]

If you’re in a DAW, the DAW dictates the Tempo when the follow Host button is enabled in EZDrummer (lower left button). If you’re not in the DAW, the tempo is determined by the Project Tempo at the bottom-middle of the EZDrummer’s interface. (also, the first drum Groove dragged to EZDrummer’s timeline dictates Project Tempo)

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

[Shootie]

Yes.

I don’t explain Loopback in this video but only introduce it.

Roland > USB > Computer.
Computer > USB > Interface.
Switch EZD or Reaper to Interface in settings, whichever you’re using.
Plug headphones into interface.

You need to learn Loopback to stream audio in from other programs. Otherwise, import individual audio tracks into reaper to jam to.

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

1

Thanked by: Dan

[Shootie]

I said use a DAW, so you could bring individual audio files (songs) to jam with. Not stream in media from a web browser or apple music for example.

The simplest setup if you just want to jam and not record is you get an audio interface with “Loopback”. The least expensive Scarlett 2i2 for example (3rd generation or higher). Loopback will enable you to pipe in audio from other applications while EZDrummer is occupying your audio driver. These interfaces come with a virtual mixer so you can mix EZD with your other audio apps to a degree. I use RME which is expensive, but has no limitations.

A vid for generic audio/toontrack setup options.

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

[Shootie]

I didn’t recreate your issue entirely, but have dealt with it in my own ways. I believe all EZD1 generation EZXs have a mandatory alternate hit. Best of luck.

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

[Author]

Replies