Thank you for the responses. I was concerned it was a trigger issue which would have been difficult to correct given that every other kit triggers fine.
Thank you for the prompt response. So in theory, you could create quit a mess if you have the module set on Log 3 and then mess with the velocity settings in SD3. Is it better when triggering SD3 to let SD3 handle things like velocity curve and just let the module be the triggering device? I had a TD25 and that was far less robust in terms of trigger options than the Mimic Pro and I am concerned I am “over programming” for lack of a better term. Particularly on the snare (ATV). I get great sensitivity direct from the module into headphones, but hot and dead spots when I play through SD3 into headphones.
Reply To: Module Settings Received by SD3 version: 3.1.6 Operating system: Windows 10
I think I understand what you are asking. You want to be able to hear EZD2 with say iTiunes all playing through the headphones in one “stream”? Apologies, I am not very technical. Assuming I have your goal correct I had the same issue and solved it by using the Prosonus AudioboxiTwo. Cost about $169 USD. I have a midi cable from my Roland TD25 into the Prosonus Box. The Prosonus box acts as the soundcard for lack of a better description. Prosonus connects to the PC via USB. So my headphones plug into the Prosonus. I am even able to split the headphones and plug a mini cord into my PC and use Audacity and record what I am hearing through the headphones.
Needed to mess around with latency settings but it works perfect now. Hope this helps. Took me a lot of experimenting to get this right.
At one point Microsoft threw an update and I had re-install the Prosonus drivers but its been fine since.
