[RifferT82]

Ok guys.  To get the drums to not distort, I had to change the bus output to left.  I took a screen shot of it.  Is there a way I can make it so it is stereo?  Also my guitar tracks are mono but can I do a stereo output?  Or route in such a way to get sound out of both left and right speakers?  kinda sucks having to only listen through the left speaker.  Just wondering if there is a way to route it.  Right now if i try to go stereo output with my guitar (when playing my amp plug in vst) all i get is a squealing annoying noise.  I change the output to “left”  and it goes away and sounds good.  It does this whether i make a mono or stereo track.  Again thanks for the help and patience.  I know I’m a total noob and its probably annoying. lol

[RifferT82]

So I don’t know if this helps? lol  I don’t know why I am still getting the amp plug in coming through my drum sound.

[RifferT82]

How do you find out if you have a group channel?  all of the group routing is there i just have it minimized.  The guitar is bussed to a mono channel.  When I open ezdrummer in my daw as an insert it automatically makes its own setup and I dont know how to change that.  So it very well could be sharing a channel together but I don't know where or how to change that?

[RifferT82]

Heres the mixer in EZdrummer 2.

[RifferT82]

ok so here is a screenshot.  hope this helps.  thanks.

Reply To: distortion from my drum track version: 2.1.8
Operating system: Windows 10

[RifferT82]

How do you screen shot on a computer?  Sorry I have never done this before.

Reply To: distortion from my drum track version: 2.1.8
Operating system: Windows 10

[RifferT82]

Ok so I maxed out the buffer and its the same.  Whats happening is when I go to my guitar track and choose a distorted guitar sound.  That effect seems to go on the drums as well instead of just going on the guitar.   So basically the amp sim is playing through the drums too.  But they are separate tracks so I don’t understand why its doing this.  Any ideas?

Reply To: distortion from my drum track version: 2.1.8
Operating system: Windows 10

[RifferT82]

Ok I will try that when I get time tonight.   I always thought that the lower the number was easier to run.  Especially for latency.  But I am still very new at this.  I have a brand new computer with i7, 8 core cpu.  So that shouldn’t be the problem.

Reply To: distortion from my drum track version: 2.1.8
Operating system: Windows 10

[RifferT82]

I am familiar with the buffer size.  I have not played too much with it.  I believe I have it set at 192.  I’ve also had it higher and lower and I didn’t notice any change.  Again I have not really played with that all that much.  Would a higher level be better?  Say 512 vs 192?

[RifferT82]

I have also been getting an audio error message when using ezdrummer 2 in my daw and it freezes everything up.  Not sure what to do with that.

Reply To: distortion from my drum track version: 2.1.8
Operating system: Windows 10

[Author]

Replies