[Micke Stålberg]

Thanks again for reply

No it doesnt help. My problem i have reported here is in my studio setup. I also have a smaller setup at home. Its an intel x299 MB 7820x pc with windows 11 64bit and the studio pc is an x570 amd 3950x pc with windows 10 64bit. “2 different platforms. But soundcard is UAD soundcards at both places. a twin soundcard at home and an x6 in studio. At home i have not tried the standalone app until now when i tried to just use it to find out if i got problem here as well. And guess what, i got this problem “AUDIO ENGINE INACTIVE” here too when i loading a groove and play it for a while. It happens now on both places in 2 different pc:s, but only in standalone app. Its not always directly, sometimes it can take 5 minutes and sometimes almost imideatley

Could it be something about this app and uad drivers maybe? Maybe someone out there who have similar setup can try and report if one experiance the same problem. I would be very glad if someone could help to solve this problem

/Micke

Reply To: “Audio Engine Inactive” Message in SD3 version: 3.3.3
Operating system: Windows 10

[Micke Stålberg]

Thanks very much for suggestions and that you want to help me here

i have now tried to play a groove from the standalone and dont even turned on the td30.
AUDIO ENGINE INACTIVE appears anyway,  now and then,  so i guess it can rule out the usb problem as well. my uad x6 is connected to a thunderbolt 3 cable and comes in to an addin card tb3 gigabyte. the thing is i havent noticed any problem from within cubase when i use SD3.
It happens only in standalone mode

Reply To: “Audio Engine Inactive” Message in SD3 version: 3.3.3
Operating system: Windows 10

[Micke Stålberg]

I am now in my studio and have tried to change samplerate but my problem is still there. I tried different settings in buffersize but nothing helped me.

I would apreciate more ideas to try but i cant find a sollution my self

/Micke

Reply To: “Audio Engine Inactive” Message in SD3 version: 3.3.3
Operating system: Windows 10

[Micke Stålberg]

my buffersize is sat to 64 but i think i can go to 32. samplerate is set to 44.100. “John Rammelt” i think i have steinberg powerscheme active in cubase, in cubase there is no problem with sd3. I have problem only when we reharsal with the band and i use the standalone app. Then i connect the td30 drumset through a midi cable to a midi interface and out from midi interface in to an usbport in my pc. if it could be a problem with powerscheme, how do you suggest i should setup a powerscheme? i havent made a supportticket but i will look at it right away now

/Micke

Reply To: “Audio Engine Inactive” Message in SD3 version: 3.3.3
Operating system: Windows 10

• This post was modified 2 years, 7 months ago by Micke Stålberg.

[Micke Stålberg]

Is there not anyone of the moderators that have a solution on this problem?

Today we made a reharsal with about 7-8 songs. I think i have to run in to the controlroom at least 20 times to reset sd3 because ”
AUDIO ENGINE INACTIVE” happened so many times. I use only standalone for reharsal. When making music in cubase its no problem with this issue. Only in standalone.
PLZ help

Reply To: “Audio Engine Inactive” Message in SD3 version: 3.3.3
Operating system: Windows 10

[Micke Stålberg]

Ihave the same problem when trying reharsal with my band. Using only standalone, but there is not possible to use it when this “Audio engine inactive” happens all the time. Using a roland td30 set for this and have activated this in the preset menu. Using 44.100hz for my apollo x6 with latest drivers also using latest sd3 3.3.3 and 44.100hz

Anyone having a clue what to do?

Reply To: “Audio Engine Inactive” Message in SD3 version: 3.3.3
Operating system: Windows 10

[Micke Stålberg]

Absolutely…its crystal clear now…thank you very much for your explanation

[Micke Stålberg]

Does that meen that if i want a kick fx and not the same fx for the snare…eh will that fx follow the output till both kick and snare in cubase?…or if i pan it as you said will it just follow the pannig left to channel 1 and right to channel 2 in cubase?

[Micke Stålberg]

Wow thank u sooo much mark..much apreciated

[Micke Stålberg]

So its possible to install lets say 1, 2 & 5 if i do it in that order. I can skip the surround thing? Can i also buy just that parts wich i need and pay only for them?

[Micke Stålberg]

oh its superior 2.3. We using it to record our coverband and our drummer (the owner of superior) dont know what the problem is either

[Author]

Replies