[J. Eskildsen]

Hi Brad

It seems like your tip on using the ballance knop on the interface did the trick. Now I get the presets full blast with no interferance.

I cannot tell you how gratefull I am, but also a little ashamed of beeing a noob 😛

Thanks a million!!!

[J. Eskildsen]

Hi Henrik and Brad

I will check out your recommendations ASAP.

Brad – you may be right about the ballance knop on my interface. Never thought that it might be the issue.

Henrik – I will test other plugins also.

Thank You both for your comments and dedication to help me out. Much appreciated!

[J. Eskildsen]

Hi Brad
Thank You for engaing yourself in this tread. Much appresiated
A) PC, core i5, 8gb ram
B) Presonus USB interface
C) Reaper DAW
D) Behringer GDI. Its a guitar amp modeller inspired by Sansamp. When not engaged it works just like a regular DI. I have tried two different buitar and a bass, and also tried running directly into the interface. Same problem.

SO once again – before engaging any of the presets in exmix you will normally just hear the clean signal from the guitar/bass. But when enganing a preset, the clean signal is still audiable. It is really weired :-/

Once again…. Thank you

[J. Eskildsen]

Hi Henrik

I am sorry for the late reply. I have tried making a screen shot, but the file was too large to up-load.

But I will try to descripe the issue again

There is really nothing special about my set-up. I have one guitar track where I have added ezmix 2. I chose one of the distorted presets and when i strum the string I hear the clean signal on top of the distorted signal. Imagine using a DI for recording, You add nothing to the signal, just pure clean sound from the guitar. Then I add the ezmix preset, but I still hear that clean sound.

I am just about to give up on ezmix….this is very frustrating. Especially when is seems like noone else in the world have had the same issue as I have

[J. Eskildsen]

Hi Henrik
Thanks for your reply
Well, there was not supposed to be a clean sound at all. Taht is the issue. Especially the the E string rings through. I have exmix inserted on a channel, not on a buss.

Yesterday I also had bad latency but not today. And finnaly…..Ive recorded a track with the Behringer Sansamp clone with distortion, added ezmix 2 with a dest. preset, and during the parts that are muted there is a high-pitch squeeling sound from the recording :-/

Kind regards
John

[Author]

Replies