[George Krokides]

ok so it seems EZD2 does not provide Mono outs. Just stereo channels. If I upgrade to SD3 will I have the option of multichannel mono outs?

• This post was modified 6 years ago by George Krokides.

[George Krokides]

No problem at all. Thank you for the really fast responses and honest opinion.

I will Try and experiment a little bit to see if I find a solution. Worst case scenario I use more channels. Still works, less flexibility but still works.

[George Krokides]

I guess my question is, is there an option on the XR18 to receive a stereo input (in this case from EZD) in one channel? If not, is there a workaround of some sort?

put simply, Iwant the snare in channel 1, not channel1+2

• This post was modified 6 years ago by George Krokides.

[George Krokides]

Thank you for the quick reply John. I’m going to try this setup and come back with my comments.

I will update EZD2 to 2.1.8 as well

[George Krokides]

Thank you for the prompt reply Barticus, that is very helpful.

However I’m still a bit confused. If my goal is to have a band practice session rather than record one, can’t I just send the individual channels directly from Toontrack Solo to XR18 and control the main and monitor mixes from the XR18 app? From your reply I guess the answer is no. So my question (which should have been more specific from the beginning and I apologize about this) is, how do I make this work? What cables do I need and what should be the signal flow? i.e TD17 to MacBook (Toontrack Solo and EZD2) via USB —–> MacBook to XR18 via USB.

I know I’m missing the DAW part in the above flow but I guess this is my question. Where does it come in?

Thanks again

[Author]

Replies