[darivo]

i know is an old post, but to clarify

 

how to route separate tracks on Presonus Studio ONE:

 

open ezdrummer-mixer and set multitrack mode

in the plugg effect, open the route tracks, and assing waht you want to show:

 

 

1

Thanked by: Markyman

[darivo]

maybe library of extreme I and II, Metal by dirk verbeuren, Death Metal….. (you culd chech Black Metal essentials on google by other brand)

Im looking for some other grooves like you said, if you find other options, please keep me updated!

[darivo]

Grubtrain wrote:

Have purchased the full version yesterday with mark lewis tones pack and the tones are beautiful BUT!!! … i am getting terrible fuzz or distortion that seems to be in the background althou it also seems slighlty louder than the actual guitar? The best way to describe is like there’s another amp feeding back badly in the background or theres a build up of swelling or a looped fuzz that builds up because i notice its always worst at the end of the recording compared to just monitoring. … ive tried alot of things and nothing has worked gates dont apply as i said the noise is at a higher level than the guitar so applying a gate just gives a completely clean tone

do you use windows?

do you use external usb recording card?

 

you could check this

https://www.toontrack.com/forums/topic/ezmix-guitar-gods-noise-problem/

 

maybe could help pyou

[darivo]

hi all

 

i think i discover most part of my problem, and it was Windows and their drivers.

 

i found over internet, some people with my issue, and other users said that windows take the external usb card, as generic recoding and expand the Input signal as a standart microphone

 

i mean (windows10 and lexicon alpha recording)

 

down to ZERO or 5%

 

i hope this could help to other users…..

 

sorry for my bad english!

[darivo]

Same issue here.

 

a lot of noise in the background.

[darivo]

thank you very much

i could try everything that you want (except next 2 weeks that im will be out for bussines) with my system

when i will be back, i will try it with CubaseLE 9.5 that i have too.

i think always is good make more questions! 🙂

[darivo]

oh sorry, sometimes i forgot that i need to use english over my Personal Computer.

here is an attachement in english

good point about my Pluggin in 32bits.

youre correct, im ussing Ntrack studio 64bits and Ezdrummer (and ezmix) 64 bits, but i dont know why my Daw is ussing 32bits pluggin.

i asked to Flavio from Ntrack and he told me that maybe your pluggin dont accept 64bits signals….
http://forum.ntrack.com/cgi-bin/ikonforum/index.cgi?act=ST;f=1;t=10893;st=10#postid124657

im sure that i find EzDrumm plugg in the correct path and is 64bits..

and of course, i have enabled Ntrack 64 bits

i was thinking in the first step the same way, that was a bad function mixing 32b plugging with 64b Daw…

Ah, EzMix also is working 32b

i think there is no problem with this, but i will test it slowly

Of course, thank you for this support

[darivo]

Hello

im on the lastest version of ntrack.

im 24bits of recording with this options…

maybe could be latency?
could be 24bits and 48khz of recording?

thanks in advance.

[Author]

Replies