[d1ondbeat]

The answer to the user original question about playing SD3’s output back through TD50x’s 8 Digital outputs, is yes.  There is a setting in the OUTPUT-USB on TD50X for USB “Loopback” and gives you that ability.  You also have to set the OUPUT to “Vendor” as well to have your PC recognize the TD50X.  On the computer, you have to choose ASIO, and then the audio output to TD50X outputs.   In the SD3 mixer, you’ll see all 32 output channels, too, and you can individuall assign the outputs.   You can of course play around with all the assignable output settings on the TD50X.   I have them set to use 8 direct outputs, and also the mains’s for my monitors.   The PD-14DS digital features are all recognized by SD3 as well.   All the setting, configuration, and execution to get this work is in the manual for the TD50X.   Note: you can upgrade TD-50 firmware to work like the newer TD-50X, though it’s a $199 cost to do download and upgrade.  Read the caveats to upgrading though, you’ll lose all your kits and have to start from scratch.

Reply To: Route sd3 to Roland TD-50 version: 3.2.5
Operating system: Windows 10

• The post has been modified 2 times, last modified 3 years, 9 months ago by d1ondbeat.

2

Thanked by: BBB57 and Seeker_Dale

[Author]

Replies