[BlackApps]

Thanks for that recommendation! Yes, muting the gate showed the snare was working fine. So, I clicked the edit icon for Frequency Gate and it brought up the screen below. There, I changed the threshold to -80dB and it works much better now. I am not sure why it was not set similar to this originally but the low sound/full sound issue is now gone. I am sure I could tweak it more and I’ll report back what I find, if you are interested. Thanks again!

1

Thanked by: Brad

[BlackApps]

I really appreciate the help. It lets me focus my attention on what can actually be done in SD3.

[BlackApps]

Thanks. I was looking for a way to customize the kit I see in SD3 to look just like my TD-50. Sounds like I just have to find a kit to start with and add more cymbals and drums to it (that will then appear on the side, not in the kit itself). I’m disappointed that SD3 can’t do that but you saved me a ton of time trying to figure out if it was possible.

• This post was modified 2 years, 6 months ago by BlackApps.

[BlackApps]

That’s terrific info. Thanks for helping.

[BlackApps]

I was reviewing the audio settings within SD3 and the popup had a section at the bottom that indicated 10ms, I am not sure what that was referring to, TD50 or laptop. Sorry so vague on this. Once I learn more about how to use the tech, I will hopefully provide clearer info. Given your notes above, if you have BabyFace Pro, I take it that plugs into a USB-C port, correct? If so, what is the rest of the configuration? Basically, what do you have plugged into the BabyFace, plugged into the computer, etc.? Are you using headphones, speakers to monitor right now, where are those connected, etc. In a nutshell, I play the TD-50 and then run an iPad into it to play along with songs. I am trying to do the same thing, but with SD3 sounds from my computer instead of internal sounds from the TD-50.

• This post was modified 2 years, 6 months ago by BlackApps.

[BlackApps]

Thanks for the help. I am new to using my PC to get additional virtual instruments to play via my TD50. The TD50 plugs right into the laptop via USB and then the sounds come from Superior Drummer 3. Can you help me understand how the audio interface factors into that to reduce latency? Right now, mine is about 10ms.

Reply To: Best way to achieve lowest latency with vdrums? version: 3.3.5
Operating system: Windows 10

[BlackApps]

Mani, did you ever get this sorted? I am having the same issue with my TD50 and SP3

Reply To: Best way to achieve lowest latency with vdrums? version: 3.3.5
Operating system: Windows 10

[Author]

Replies