[Benebrius]

Tried that, had no effect whatsoever for me. Don’t think it has worked for anyone, really. There are still complaints everywhere about this issue.

[Benebrius]

Exactly. Amazing software except for that one (huge) drawback. Hopefully will be resolved at some point.

 

[Benebrius]

For anyone who may be searching… like I was…

Followed the suggestion from a member on another thread (thanks again!).

I made a hybrid kit with my TD17 combined with SD3.

Made a new kit in the module, turned down all pads except the hi-hat.

In SD3 I turned off the hi-hat & all associated bleeds etc. Now my entire kit is triggered by SD3 except for the hihat which is from the module library. Hihat works perfectly now (however, effects from SD3 wont be applied to hi-hat, which is ok if your kit is dry). This will do until Toontrack come up with a fix… if ever 😉

• This post was modified 2 years, 10 months ago by Benebrius.

[Benebrius]

Cheers mate!

I followed your method and made a hybrid kit with my TD17.

Made a new kit in the module, turned down all pads except the hi-hat.

In SD3 I turned off the hi-hat & all associated bleeds etc. Now my kit is triggered by SD3 except for the hihat which is from the module. Hihat works perfectly now. This will do until Toontrack come up with a fix… if ever 😉

Much appreciated 🙂

Reply To: Non-smooth transition between hi-hat samples version: 3.3.3
Operating system: Windows 10

[Author]

Replies