Windows 64 bit standalone not playing grooves

[Greg]

All, just installed EZ2, windows 7 64 but, RME UFX over midi and the standalone won[t play any grooves. I can play the kit with edrums and click on the drums and hear output. I can enable the metronome to play in standalone, but trying to play any groove results in silence from the browser or dragging it into the song block section. Grooves however play fine inside of Cubase. Any thoughts?

Intel 13900K, Windows 11 , Cubase Pro 13.0.30, Studio One 6.2.1.64495, 64GB RAM, UA Apollo x4 and UA Apollo X8 Thunderbolt,, 64 sample buffer size, Radeon 570, 42″ 4k monitor

MIDI controller: Roland A-37, Jamstik Studio, MCU Pro + expander
Drum Brain: Yamaha DTX 900, RHH135 hihat, 2 crash and 1 ride cymbal, 4 toms.

Topic

[Greg]

PS. 32 bit version standalone plays the grooves fine.

Intel 13900K, Windows 11 , Cubase Pro 13.0.30, Studio One 6.2.1.64495, 64GB RAM, UA Apollo x4 and UA Apollo X8 Thunderbolt,, 64 sample buffer size, Radeon 570, 42″ 4k monitor

MIDI controller: Roland A-37, Jamstik Studio, MCU Pro + expander
Drum Brain: Yamaha DTX 900, RHH135 hihat, 2 crash and 1 ride cymbal, 4 toms.

[Greg]

looks like if i change the midi in channel to any, the grooves play in 64 but. if left on channel 10, they don’t.

Intel 13900K, Windows 11 , Cubase Pro 13.0.30, Studio One 6.2.1.64495, 64GB RAM, UA Apollo x4 and UA Apollo X8 Thunderbolt,, 64 sample buffer size, Radeon 570, 42″ 4k monitor

MIDI controller: Roland A-37, Jamstik Studio, MCU Pro + expander
Drum Brain: Yamaha DTX 900, RHH135 hihat, 2 crash and 1 ride cymbal, 4 toms.

[John]

Yes, anything else but ‘1’ or ‘Any’ on MIDI In results in not hearing the grooves. I *think* it is by design but let me check.

John Rammelt - Toontrack
Technical Advisor

[Erik Phersson]

@gmontano said:

All, just installed EZ2, windows 7 64 but, RME UFX over midi and the standalone won[t play any grooves. I can play the kit with edrums and click on the drums and hear output. I can enable the metronome to play in standalone, but trying to play any groove results in silence from the browser or dragging it into the song block section. Grooves however play fine inside of Cubase. Any thoughts?

Yes, this is a bug that we will fix.

Erik Phersson - Toontrack
Head Of Development

[Erik Phersson]

@gmontano said:

PS. 32 bit version standalone plays the grooves fine.

This is weird, the behavior should be exactly the same in 32-bit.

Erik Phersson - Toontrack
Head Of Development

[Greg]

Thanks for the update. I’ll check what my settings are in 32 bit later.

Intel 13900K, Windows 11 , Cubase Pro 13.0.30, Studio One 6.2.1.64495, 64GB RAM, UA Apollo x4 and UA Apollo X8 Thunderbolt,, 64 sample buffer size, Radeon 570, 42″ 4k monitor

MIDI controller: Roland A-37, Jamstik Studio, MCU Pro + expander
Drum Brain: Yamaha DTX 900, RHH135 hihat, 2 crash and 1 ride cymbal, 4 toms.

[Greg]

Looks like 32 bit is the same behavior. 32 bit defaulted to midi channel any. I must have had 64 bit set to channel 10. After I figured out it was the midi channel, I didn’t go back and re check the 32 bit version. Thanks.

Intel 13900K, Windows 11 , Cubase Pro 13.0.30, Studio One 6.2.1.64495, 64GB RAM, UA Apollo x4 and UA Apollo X8 Thunderbolt,, 64 sample buffer size, Radeon 570, 42″ 4k monitor

MIDI controller: Roland A-37, Jamstik Studio, MCU Pro + expander
Drum Brain: Yamaha DTX 900, RHH135 hihat, 2 crash and 1 ride cymbal, 4 toms.

[Author]

Replies