Upgraded to EZ drummer 2 and installed MEtal! PROBLEM!HELP!

[Vejichan]

Ok I finally caved in and upgraded ez drummer 2...

Ok I finally caved in and upgraded ez drummer 2 because metal! couldn’t be installed in Ez drummer 1. A few Questions!
1) do i have to uninstall ez drummer 1 when i install ez drummer 2?
2) after installing ez drummer 2 w/Ez drummer 1 already installed previously.. i now have on my PC desktop the old toontrack solo 32 and a new EZ drummer icon.
Can i delete/uninstall the old toontrack solo 32 without any problems?
3) After SUCCESSFULLY installing METAL! EZX expansion and Metal machine EZX expansion in ez drummer 2. I noticed after opening up ez drummer 2, when i go to the top to change the entire drum kit i do see metal and metal machine.. (entire drum kit) BUT when I am using ez drummer 2 modern kit and want to change each individual drum kit .. for example i go to snare kit, toms, cymball etc.. all i see is metal machine… no metal! ? what’s going on?
4) when i open up a previous project where i used ez drummer 1( i usually multi out so each drum kit is on it’s own track) now when i open up the project.. only 3 tracks are used? and can i multi-out each individual drum kit to separate tracks in ez drummer 2?
5) after i decide the midi and the groove.. i want to move the midi from inside ez drummer 2 to the midi on the track like the way it was in ez drummer 1.. how do i do this?

PLEASE DON”T IGNORE my QUESTIONS>
I am waiting for your support and response.
thank you

Ok I finally caved in and upgraded ez drummer 2 because metal! couldn’t be installed in Ez drummer 1. A few Questions!
1) do i have to uninstall ez drummer 1 when i install ez drummer 2?
2) after installing ez drummer 2 w/Ez drummer 1 already installed previously.. i now have on my PC desktop the old toontrack solo 32 and a new EZ drummer icon.
Can i delete/uninstall the old toontrack solo 32 without any problems?
3) After SUCCESSFULLY installing METAL! EZX expansion and Metal machine EZX expansion in ez drummer 2. I noticed after opening up ez drummer 2, when i go to the top to change the entire drum kit i do see metal and metal machine.. (entire drum kit) BUT when I am using ez drummer 2 modern kit and want to change each individual drum kit .. for example i go to snare kit, toms, cymball etc.. all i see is metal machine… no metal! ? what’s going on?
4) when i open up a previous project where i used ez drummer 1( i usually multi out so each drum kit is on it’s own track) now when i open up the project.. only 3 tracks are used? and can i multi-out each individual drum kit to separate tracks in ez drummer 2?
5) after i decide the midi and the groove.. i want to move the midi from inside ez drummer 2 to the midi on the track like the way it was in ez drummer 1.. how do i do this?

PLEASE DON”T IGNORE my QUESTIONS>
I am waiting for your support and response.
thank you

Topic

[John]

By Full Product, I meant this:

John Rammelt - Toontrack
Technical Advisor

[Vejichan]

PLEASE RESPOND!

ok we have been through this for the last week. I have installed/uninstalled/installed/uninstalled. So Today (12/05/13)
Starting on my PC free of any toontrack products
1) I downloaded all the ezdrummer files/upgrades + Metal! EZX upgrades/files + Metal Machine EZX upgrades/files + all my ezx/midi packs from toontrack
(another 5 hours spent downloading and installing)
2) I installed everything
and the conclusion
3) SAME.. all my ezx shows up in individual drum kits except for METAL! EZX

please respond…what do i do now?> metal! ezx .. i just want to exchange it for made of metal ezx!
regards, David

[Vejichan]

correction for 1) i downloaded all ezdrummer 2 files and upgrades.. i didn’t download or install any ez drummer 1 files this time

[John]

Hi,

if it’s not showing up, how comes it is Authorized in your account? Not trying to be a wise-ass here, just curious.

John Rammelt - Toontrack
Technical Advisor

[Vejichan]

it shows up but the individual kits aren’t. i thought i clearly stated that.
again to clarify. Metal! has been installed and it works BUT on my ezd2.. you can’t use metal! individual kits when you are using a different ezx drum kit.

[John]

OK,

sorry I mis-read and misunderstood what happened after your re-installation.
If what’s shown in those pictures still is valid, I think you need direct contact with Support rather than assistance via the Forum. Did you open a Ticket according to Scott’s instructions?

John Rammelt - Toontrack
Technical Advisor

[Thomas Coolberth]

OK I was having the same problem but I figured out how to select individual kits .

Just act as if you are going to select an individual drum and see the kit menu in the lower left … it’s a little buried so tisk risk on the programmer … but it is there. See screen shot I uploaded.

[hyropa]

I have ez drummer 2.1.8 /x64 version /and only one expansion pack – ezx metal ! 1.5.8 and were all updates instaled.

EZX kit pieces not being selectable in the kit piece menu – up in orange field.

When is select pack metal – i can go to /basic, tape, original mix and ezd 1 mixer present/ and only from ezd 1 mixer present  can I go to /default, compresed, dry , tail off and route off/.

where are kits ? /big crack kit, fat modern room kit and those others???/

thanks

EZdrummer version: 2.1.8
Operating system: Windows 10

[Scott]

hyropa wrote:

I have ez drummer 2.1.8 /x64 version /and only one expansion pack – ezx metal ! 1.5.8 and were all updates instaled.

EZX kit pieces not being selectable in the kit piece menu – up in orange field.

When is select pack metal – i can go to /basic, tape, original mix and ezd 1 mixer present/ and only from ezd 1 mixer present  can I go to /default, compresed, dry , tail off and route off/.

where are kits ? /big crack kit, fat modern room kit and those others???/

thanks

EZdrummer version: 2.1.8
Operating system: Windows 10

Please see the post directly above yours. There is a pic showing how to access the kit presets.

Scott Sibley - Toontrack
Technical Advisor

[hyropa]

HI, excuse me, but I want this from orange dropdown menu in EZ drummer 2

https://www.google.com/imgres?imgurl=http%3A%2F%2F2.bp.blogspot.com%2F-D7eRw-8L5PU%2FUnfZI5HDr3I%2FAAAAAAAAA5Q%2FpiW9Zf4aPkA%2Fs1600%2F05kits.png&imgrefurl=http%3A%2F%2Fwww.fellklang.com%2F2013%2F11%2Ftoontrack-metal-ezx-review-4995-69.html&docid=S6k3VI1SWo6qIM&tbnid=5xX8sugf2Ggq0M%3A&vet=10ahUKEwiIp8nw5ezlAhUJahQKHSjtAO8QMwh1KC4wLg..i&w=829&h=485&itg=1&client=firefox-b-d&bih=969&biw=1730&q=toontrack%20metal%20pic%20showing%20how%20to%20access%20the%20kit%20presets.&ved=0ahUKEwiIp8nw5ezlAhUJahQKHSjtAO8QMwh1KC4wLg&iact=mrc&uact=8

But in orange dropdown menu ist only metal…

I have ez drummer 2.1.8 /x64 version /and only one expansion pack – ezx metal ! 1.5.8 and were all updates instaled.

EZX kit pieces not being selectable in the kit piece menu – up in orange field.

When is select pack metal – i can go to /basic, tape, original mix and ezd 1 mixer present/ and only from ezd 1 mixer present can I go to /default, compresed, dry , tail off and route off/.

where are kits ? /big crack kit, fat modern room kit and those others???/

Why I have not kits from Mark Lewis, Jason Suecof, Daniel Bergstrand ???

please write me  step by step how can I add this KITS in orange menu….or where is any operation guide to adding this kits ?

thanks

EZdrummer version: 2.1.8
Operating system: Windows 10

[hyropa]

Yes, I see this pic…but must I select single kit  one to one..and so…and than making to user menu my kits…and add to dropdown orange menu.

its ineffective..

I want select complete drums kit ..from orange menu Mark Lewis, Jason Suecof, Daniel Bergstrand like in ez drummer 1.

When ist only one way to add Mark Lewis, Jason Suecof, Daniel Bergstrand kits , must I created in user menu selectly…???

I hope, that´s not.

thanks

EZdrummer version: 2.1.8
Operating system: Windows 10

[Scott]

hyropa wrote:

Yes, I see this pic…but must I select single kit  one to one..and so…and than making to user menu my kits…and add to dropdown orange menu.

its ineffective..

I want select complete drums kit ..from orange menu Mark Lewis, Jason Suecof, Daniel Bergstrand like in ez drummer 1.

When ist only one way to add Mark Lewis, Jason Suecof, Daniel Bergstrand kits , must I created in user menu selectly…???

I hope, that´s not.

thanks

EZdrummer version: 2.1.8
Operating system: Windows 10

The kit presets (Mark Lewis, Jason Suecof, Daniel Bergstrand) are not loaded from the Orange menu. Only from the Kit menu as shown.

The link you provided is for use in EZD1. It was changed in EZD2.

Please see this FAQ and video for preset handling in EZD2.

https://www.toontrack.com/faq/where-are-my-ezdrummer-2-drum-kit-presets/

Scott Sibley - Toontrack
Technical Advisor

[Author]

Replies