Tuning missmatch with ez key when tuning guitar to standard 432hz

[Frank anselmo]

I have an issue when tuning guitar to standard 432hz.  I decided to go with this tuning but now I am unable to match ez keys to that particular tuning.  I tried to adjust the tuning in the TUNING section in ez keys but I still couldn’t get a match.  Any insight is welcome!  Warm regards!

EZkeys version: 1.2.5
Operating system: Windows 10

Topic

[Karsten P.]

Just posted that in an other thread…

I don’t know if this is of any help, but i had an issue also with tuning in EZKeys. When i used an non standard tuning and changed a preset or Instrument, it did not keep the tuning. But after changing preset/instrument and THEN adjusting the tuning again it was ok….

1

Thanked by: Frank anselmo

[Frank anselmo]

thanks, I’ll check that out

[Martin Stephenson]

Did you find a fix for this Frank, I have the same problem and EZ keys and EZ Bass just will not flex to 432, it says it is on the tuner but that is Logic, the Toontrack cannot adjust?

[Author]

Replies