Tuning

EZkeys Help
Viewing 8 replies - 1 through 8 (of 8 total)
  • Erik
    Participant

    EZkeys reads whatever MIDI information is sent from your master keyboard. (relevant messages are note value and pitch wheel; aftertouch is ignored)

    If you unplug your Oxygen keyboard, restart EZkeys and play with the mouse in the EZkeys interface, does it still sound out of tune? If not, your keyboard probably needs a look at.

    EZkeys can be tuned with the tuning panel located on the right side of interface.

    Erik Berglund — Toontrack

    Gerry
    Participant

    Yes, tried everything is of no use

    Karsten P.
    Participant

    I don’t know if this is of any help, but i had an issue also with tuning in EZKeys. When i used an non standard tuning and changed a preset, it did not keep the tuning. But after changing preset and THEN adjusting the tuning again it was ok….


    EZkeys version: 1.3.0
    Operating system: Windows 10
    Gerry
    Participant

    Detuning is only in standalone mode
    EZ Keys works normally in the DAW and is not out of tune.


    EZkeys version: 1.3.0
    Operating system: Windows 10
    Gerry
    Participant

    what can that be for about 5 minutes is the EZ Key right then suddenly it is out of tune by a quarter tone. I’ve only had that since Win 10, and Win 7 didn’t have it


    Operating system: Windows 10
    Erik
    Participant

    Hey Gerry,

    Could you save a project from the standalone application and attach it here? You will probably need to put it in a zip file first. (Right click the file and select “Send to… / Compressed (zipped) folder”)

    Thanks

    Erik Berglund — Toontrack

    Gerry
    Participant
    BEST ANSWER

    Hallo, ich habe die verstimmten EZ-Tasten aufgenommen.
    Das echte Klavier, das Sie hören können, ist mein Korgpiano PAX4.
    Die EZ-Tasten klingen falsch.
    Alles ist eingestellt, ohne auf der Vorderseite der EZ-Tasten verstimmt zu sein. Die Stimmung beginnt normalerweise nach 15 Minuten.
    Grüße Gerry [Anhang file = “2620245”]

     

    I recorded this with Cubase, thought this problem is only in standalone operation.
    Unfortunately also with every DAW


    EZkeys version: 1.2.5
    Operating system: Windows 10
    • This post was modified 5 years, 1 month ago by Gerry.
    Gerry
    Participant

    How can I find out if my master keyboard is out of tune or EZKeys. Where can you adjust this. Got Oxygen 49 as Masterkey
    Greetings Gerry

    Operating system: Windows 10

    Wait urgently for an answer.
    Why is the EZ Key out of tune? Only since Win 10
    With Win 7 everything fit perfectly
    Previously thought it was only in standalone mode.
    But that’s exactly the case with all DAWs. Here in my example with Cubase


    Operating system: Windows 10
Viewing 8 replies - 1 through 8 (of 8 total)

No products in the cart.

×