TD27 + EZD3 – sound issue

[Kevin Blocksom]

I’m using a MacBook Air w/Ventura OS and EZDrummer 3 connected to TD27 (ver2.0) via USB.

I did a factory reset, but when I play the drums, I don’t hear the sounds properly assigned to each pad. Is there a preset sound on the module so that I only hear the EZD3 sounds and not the module sounds?

Thanks in advance.

EZdrummer version: 3.0.0
Operating system: macOS Ventura (13)

Topic

[Jeremy967tree4]

There is a vendor setting in the module. Not sure how to find it, maybe under system, deep into system.  You may have already done this, but I was happy to have the chance to possibly help. Aloha

[Kevin Blocksom]

Thanks for trying to help. This setting is already set to vendor.

Is there a default sound profile that the module should be on so that EZDrummer 3 sounds is all you hear once the pads are hit?

EZdrummer version: 3.0.0
Operating system: macOS Ventura (13)

[Kevin Blocksom]

This has been resolved.

I found the answer in another thread, in the same area where you change the setting from generic to vendor, you also have to turn off local control to off.

EZdrummer version: 3.0.0
Operating system: macOS Ventura (13)

1

Thanked by: akabusker

[Author]

Replies