Sustain / Damper Padel (CC64) in EZKeys 2

[dimugi]

I would like to automate the Sustain Pedal in EZKeys in the Grid Editor, but CC64 is missing when selecting the controller.

Does anyone have an idea how I can automate the pedal later?

When importing the piano parts, I don’t always manage to press the pedal correctly in timing, so I would like to set the pedal like it is possible with the Belocity, but when selecting the controllers, the CC64 is not listed.

Thank you in advance for your time, interest and effort.

With musical greetings

Dirk (dimugi)

EZkeys version: 2.0.0
Operating system: Windows 10

Topic

[dimugi]

I have to add that I want to run EZKeys in standalone mode.

[John]

BEST ANSWER

Hi,

just make sure you have the ‘Sustain’ lane visible in the Grid Editor and use the Pencil tool to draw in the sustain. Please see the below screen shot.

BR,
John

John Rammelt - Toontrack
Technical Advisor

[dimugi]

Thanks for the help!
I overlooked that, because I thought that like in a DAW, below where the velocity is also located, it must be set visibly and the CC64 controller selected for this purpose.

That’s why I didn’t see that this pedal is already shown below.

I’ve read about 2/3 of the manual and so far the pedal hasn’t appeared in it. I’m currently working on the grid editor.

[Author]

Replies