Routing SD3 out channels to Tascam model 12 PC returns

[Remco Bouwens]

Hi there,

I use a Tascam model 12 as my interface in Logic X and SD standalone. In Logic X I can route SD multi out to all the PC returns in the Tascam model 12 (stereo output, 3-4, 5-6, 7-8 & 9-10 -> see screenshot 3). In SD3 standalone however the interface confuses me a lot and can’t route SD 1-2 to Tascam 1-2, SD 3-4 to Tascam 3-4, etc.

In SD3 standalone the multi outs are named Output(L) 1 & Output(R) 1, Output(L) 2 & Output(R) 2, etc. Can’t assign output 1 & 2 to Tascam 1 & 2 etc.

Does anyone has experience routing the channels on this interface?

Best, Remco

Superior Drummer 3 version: 3.3.6
Operating system: macOS Ventura (13)

Topic

[StarclassicPerformer]

BEST ANSWER

Did you already tried:

Out Channels

Output(L) 1:1
Output(R) 1:2
Output(L) 2:3
Output(R) 2:4
Output(L) 3:5
Output(R) 3:6
Output(L) 4:7
Output(R) 4:8
Output(L) 5:9
Output(R)5:10

In the mixer you can use buses in a configuration like the screenshot:

Output 1 = Left drum mix (See the bus sends to the buses …ST for stereo mixing)
Output 2 = Right drum mix (See the bus sends to the buses …ST for stereo mixing)
Output 3 = Kick (note the panning on the bus to left)
Output 4 = Snare (note the panning on the bus to right)
Output 5 = Toms (note the panning on the bus to left)
Output 6 = Hihat (note the panning on the bus to right)
Output 7 = OH Left (note the panning on the bus to left)
Output 8 = OH Right (note the panning on the bus to right)
Output 9 = Ambience Left (note the panning on the bus to left)
Output 10 = Ambience Right (note the panning on the bus to right)

Greetings Wouter

Superior Drummer 3 version: 3.3.6
Operating system: macOS Ventura (13)

[Remco Bouwens]

Hi Wouter,

Thanks very much for your reply!! The output settings you suggested work the way I wanted.

Best,

Remco

Superior Drummer 3 version: 3.3.6
Operating system: macOS Ventura (13)

[Author]

Replies