Re-installation and Updates?

[Mauri]

Hi,

If I need to re-install EZD2, or Superior2, is it enough to run the original installer and just the latest updates, the same with the library and MIDI updates?

Thanks,

Mauri.

Cubase Pro 11 x64 with jBridge | WaveLab Elements 10.0.50 | W10 Pro x64 Dual Boot on 2 SSDs plus 3 SSDs for samples and project/audio files | i7 5930K @ 4.6GHz (stable) | ASUS X99 Pro | 32GB G.SKILL Ripjaws RAM | RME HDSPe AIO | GPU AMD Radeon RX 580 Series | Mackie HR624 MKII | 2 x UAD2 Solo PCIe | 2 x 24" LED monitors...

Topic

[John]

In short; Yes.

John Rammelt - Toontrack
Technical Advisor

[Mauri]

A ‘short’, Thank You :)!

Mauri.

Cubase Pro 11 x64 with jBridge | WaveLab Elements 10.0.50 | W10 Pro x64 Dual Boot on 2 SSDs plus 3 SSDs for samples and project/audio files | i7 5930K @ 4.6GHz (stable) | ASUS X99 Pro | 32GB G.SKILL Ripjaws RAM | RME HDSPe AIO | GPU AMD Radeon RX 580 Series | Mackie HR624 MKII | 2 x UAD2 Solo PCIe | 2 x 24" LED monitors...

[Roy Velasquez]

I tried to un-install ran thru the process, but I cannot install again, are there preferences out there or other hidden files that must
be deleted after the un-install?
I’ve tried everything I can think of.

Roy

[John.Baxter 159]

@Mauri said:

A ‘short’, Thank You :)!

Mauri.

Hi Mauri, I’m a NOOBY & trying to get to grips with the folders. Any idea what HOST 64 & PLUG 64 cabinet folders are? John (I know the 64 Bit is what I installed).

[Mauri]

Hi, and welcome to Toontrack!

Where are these files, are they in the installation package?

Mauri.

Cubase Pro 11 x64 with jBridge | WaveLab Elements 10.0.50 | W10 Pro x64 Dual Boot on 2 SSDs plus 3 SSDs for samples and project/audio files | i7 5930K @ 4.6GHz (stable) | ASUS X99 Pro | 32GB G.SKILL Ripjaws RAM | RME HDSPe AIO | GPU AMD Radeon RX 580 Series | Mackie HR624 MKII | 2 x UAD2 Solo PCIe | 2 x 24" LED monitors...

[Mauri]

I just had a look at the EZDrummer2 installation package, that’s where those files are. I assume they are content files and you need’nt be concerned about them, just run the installer and you should be ok.

Are you having some kind of a problem?

Cubase Pro 11 x64 with jBridge | WaveLab Elements 10.0.50 | W10 Pro x64 Dual Boot on 2 SSDs plus 3 SSDs for samples and project/audio files | i7 5930K @ 4.6GHz (stable) | ASUS X99 Pro | 32GB G.SKILL Ripjaws RAM | RME HDSPe AIO | GPU AMD Radeon RX 580 Series | Mackie HR624 MKII | 2 x UAD2 Solo PCIe | 2 x 24" LED monitors...

[John]

@roy:
what is giving you a problem exactly? Error messages? You’re not trying to run the installers without fully extracting the ZIP archive first, are you?

@John.Baxter 159:
Mauri is correct, those are part of the installation package and you do not need to do anything with them. Just run the installer(s).

John Rammelt - Toontrack
Technical Advisor

[Author]

Replies