Problem with Edrums preset in SD3

[Madmax231]

Hello,

 

I trigger SD3 using my Roland TD-27 drum module, and I have a small problem. I added a couple toms to my system, connected to the Aux2 and Aux3 outputs of the module. When I use the TD-27 preset, these do not sound as toms. No problem, I just re-mapped so that they sound like and are recognized as an extra tom and extra floor tom. I saved this new mapping and named this new preset TD-27 Extra Toms (saved in the preset page). I also saved the “default project” of SD3 with this edrum preset as the active preset.

 

Problem is, when I shutdown and restart the program, even though the “TD-27 Extra Toms” is still selected, it appears that the changes I made to this preset did not save. So I have to go through the whole process again.

 

What am I doing wrong? Is this a bug with the software?

 

Thank you!

Operating system: macOS Monterey (12)

Topic

[Mark King]

There’s another thread on this. It’s a known bug introduced in the latest version. Hopefully an update soon as this is quite major.

SD3 with older sdx,s plus Rooms of Hansa and Death & Darkness. Cubase and wavelab current versions. Roland TD50x using all trigger inputs for triggering SD3 only. Windows 11 computer. Various keyboards and outboard gear as well as VST instruments. Acoustic drums: Yamaha 9000 natural wood and Pearl masters. Various snare drums. RME BabyFace Pro FS and Adam A7X monitors

[drumjack52]

Mark King wrote:

There’s another thread on this. It’s a known bug introduced in the latest version. Hopefully an update soon as this is quite major.

Introduced in 3.3.1? The previous version worked ok for me. Haven’t tried anything re: remapping MIDI in the current revision.

Superior Drummer 3 version: 3.3.1
Operating system: macOS High Sierra (10.13)

Jack
aka musicman691 on other forums
Superior Drummer 3.4.0
Area 33 1.0.0
Death and Darkness 1.0.1
PT 2021.6
OSX 10.13.6
3.46 GHz hex core 2012 MacPro 48 gig ram

[Mark King]

I think it’s the latest version. I haven’t tried saving any new edrum mapping presets yet myself in the latest version and I’m not likely to unless I get another expansion.

SD3 with older sdx,s plus Rooms of Hansa and Death & Darkness. Cubase and wavelab current versions. Roland TD50x using all trigger inputs for triggering SD3 only. Windows 11 computer. Various keyboards and outboard gear as well as VST instruments. Acoustic drums: Yamaha 9000 natural wood and Pearl masters. Various snare drums. RME BabyFace Pro FS and Adam A7X monitors

[watelessness]

i am new to SD3 and have experienced several learning-curve issues.  this was one of them, as i also have a TD-27 with extra triggers.  i found that i had to save the configuration on the settings>”midi in/e-drums” tab,  AND also save the project.  when re-opening it make sure the button is outlined in blue.  i’m still on 3.3.0 , build 33063 so ymmv.

[Author]

Replies