Output Level on Mixer Changing

[Michael Manchisi]

We recorded using SD into Logic and in the mix I noticed the volume was low. I went to the mixer and changed the main output level but anytime I would jog back within the song it would go back to the original setting. Almost like the volume automation was recorded (it is not on in logic). Is there a way to make volume adjustments to the output mixer within SD 3 and make them stick?

Make sense? Thanks for the help.

MM

Topic

[Henrik Ekblom]

The mixer settings should stay, unless you do some kind of automation. While playing back – check the mixer, and possibly any Macro Controllers, to see if they move around when you start the playback from Logic.

Henrik Ekblom - User Experience Designer
Toontrack

[Stephen Harrison]

I had this exact thing.
I never use automation.
I would press play and the drums would be maybe 75% volume then after the 2nd bar or so they would return to full volume.

[Henrik Ekblom]

Can you guys send us a Superior Drummer 3 project file where this happens so we can have a look at it?

Henrik Ekblom - User Experience Designer
Toontrack

[Author]

Replies