Output 5/6 Skipped when applying multi channel outputs

[Ryan athey]

Howdy,

Bit of a random one, but I have a template setup in logic pro x 10.5 with a multi output instance of SD3 on it. Nothing fancy, intended to route: 1/2 Kick, 3/4 Snare, 5/6 HH etc etc so all I’ll have to do is apply multichannel outs to any preset or kit and it will map to logic accordingly.

Interestingly enough, whenever I hit mixer > apply multichannel outs it skips output 5/6, maps 1-4 and 7-24. I can manually adjust this of course, but I thought this was strange and keeps things a little messy. Anybody have any experience with this? Thank you.

Superior Drummer 3 version: 3.1.7
Operating system: macOS Mojave (10.14)

Topic

[John]

Hi,

haven’t seen this one. Have you updated to the latest Logic Pro version 10.5.1 that was released a few days ago?.

BR,
John

John Rammelt - Toontrack
Technical Advisor

[John]

Hi, I realise I misread your post but still, I cannot recreate in Logic 10.5.1 with SD3.1.7. Can you record a short screen cast?

BR,
John

John Rammelt - Toontrack
Technical Advisor

[Ryan athey]

Here a screencast of the issue

Seems to happen with any and all presets. Haven’t updated logic yet.

 

*edit: Seems to only happen to presets that utilize more than two busses. For the first two busses it will apply 1/2-3/4 after that it will skip 5/6 then go out of order from there.

• This post was modified 5 years, 8 months ago by Ryan athey.

[Erik]

BEST ANSWER

Hey Ryan,

The output selection is not random when applying multi out. Outputs 5/6 are usually reserved for the snare bottom mics (depends on the library), which in many presets are routed into the same bus as the top snare mic(s).

Erik Berglund — Toontrack

[Author]

Replies