Not all mics give sound

[Demious]

Ive noticed that not all mics of one of the hihats from the default library give sound. Maybe it are more instruments, I havent got time to test everything, of course… Right now its the ’14” top Bosphorus/top Zildjan’ that doesnt give any sound on the OH Cond mic and the Amb Mid mic. I tried sending these mics to different mixer channels, which give sound for every other mic I send into them, but those 2 mics dont give sound in any way I tried. Ive got all 5 library parts installed, so it cant be Im missing samples.

Advise on how to fix this is much appreciated

Cheers!
Maarten

Mac Pro, Catalina, Studio One 5 Pro, Quantum2626

Topic

[Demious]

Okay, I found whats wrong, not all mics where active on those channels, which brings allong another problem. When I created the kit, I went over all channels to check if all the right instruments where active, so for OH and Amb channels, that would be all mics and I saved the preset with all those mics on (yes, Im sure, I save almost after every change I made, so if I might have missed one, I saved it at most a few seconds later again)

So, a saved preset has settings changed when loaded. Any ideas on how to prevent this?

Cheers!
Maarten

Mac Pro, Catalina, Studio One 5 Pro, Quantum2626

[Henrik Ekblom]

You saved a (Drums and Mixer) User Preset, up in the top right side of the SD3 window? This should save the states of instruments and their volumes

—

As the image above shows, I changed the bleed to only have Kick and Snare enabled for the channel OH Dyn, saved a (Drums and Mixer) User Preset, and loaded it, and the values was restored as I had saved them.

—

Are you using the latest version of SD3 – v 3.1.2?

Henrik Ekblom - User Experience Designer
Toontrack

• This post was modified 6 years, 3 months ago by Henrik Ekblom.

[Author]

Replies