No sound from superior drummer 3 in logic

[Sticks_23]

Hi, I’ve opened superior drummer on it’s own and the sound is coming through when I click on the kit. However, when I open it in logic, I’m not getting any sound come through despite the fact it’s sensing it (see below). I’m sure it’s a simple fix but I’m a little stuck atm, any help would be massively appreciated!

Superior Drummer 3 version: 3.3.5
Operating system: macOS Monterey (12)

Topic

[drumjack52]

Unsolo the track with SD3. Depending on how Logic works if you have SD3’s track feeding another track and you solo the SD3 track you may not hear anything downstream from the SD3 track. ProTools has a solo safe selection for each of it’s tracks and I’d have to use that.

Superior Drummer 3 version: 3.3.5
Operating system: macOS High Sierra (10.13)

Jack
aka musicman691 on other forums
Superior Drummer 3.4.1
Area 33 1.0.0
Death and Darkness 1.0.1
PT 2021.6
OSX 10.13.6
3.46 GHz hex core 2012 MacPro 48 gig ram

[Sticks_23]

Thanks for the tip, nothings changed unfortunately :/

[Bear-Faced Cow]

BEST ANSWER

Your screenshot says it all. Your instrument channel output is set to “no output”. Set the channel output to your main stereo out.

jord

---

Jordan L. Chilcott

Web Site: https://jordanchilcottmusic.com/

• This post was modified 3 years ago by Bear-Faced Cow.

1

Thanked by: Sticks_23

[Sticks_23]

That’s worked now, thanks a lot! Just me being a dummy as per lol

1

Thanked by: Bear-Faced Cow

[Author]

Replies