Need Help Getting Audio to A Speaker

EZdrummer Help
Viewing 2 replies - 1 through 2 (of 2 total)
  • Scott Eshleman
    Participant

    The Alesis module is not useless if that is the means by which you are triggering EZDrummer3.

    The question is whether or not you can decrease the module’s drum sounds in the speaker output of the module
    without also decreasing the USB MIDI trigger output to EZDrummer3.
    If you can do this, you can connect the headphone output of your laptop to the AUX IN of the Alesis module
    enabling the output of EZDrummer3 thru the Alesis out to the speaker or the Alesis headphone output.

    If you can’t decrease the module’s drum sounds in the speaker output of the module
    without also decreasing the USB MIDI trigger output to EZDrummer3, you will need to connect your speakers
    to your laptop via a soundcard or audio interface.

    It is not recommended that you connect your laptop’s headphone output directly to your speakers.

    1

    Thanked by: ToddLew25
    ToddLew25
    Participant

    Thank you so much! I will try that. I didn’t think to connect the headphones jack on the laptop to the aux in on the module. Then if I lower the module kit volume to zero, hopefully I can use the module volume to control the EZdrummer 3 drum kit sound. Then I’ll connect a 1/4″ from the module to my monitor or to a mixer and run it through a PA. I’ll see if that works. I appreciate your help.

Viewing 2 replies - 1 through 2 (of 2 total)

No products in the cart.

×