Multi Hardware Out EZD2?

[Shootie]

I thought a while back that in the Audio Settings Dialog>Channel Out, there was a “Multi-Out” check box where I could directly access/route to individual channels in my interface. Did I just confuse that for SD3’s Channel Out settings, or did it use to be there? SD3 image attached.

If it was never there and I wasn’t willing to use SD3, are there any workaround solutions beside changing my workflow buy using a DAW?

Thanks for your time.

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

Topic

[Brad]

BEST ANSWER

Shootie wrote:

I thought a while back that in the Audio Settings Dialog>Channel Out, there was a “Multi-Out” check box where I could directly access/route to individual channels in my interface. Did I just confuse that for SD3’s Channel Out settings, or did it use to be there? SD3 image attached.

If it was never there and I wasn’t willing to use SD3, are there any workaround solutions beside changing my workflow buy using a DAW?

Thanks for your time.

Hey, you’re right! I restored one of my Windows Virtual Machines back to where EZD2.0.2 was installed. This is what I found!

I would get a hold of support and put in a ticket. Nice catch.

EZdrummer version: 2.2.1
Operating system: macOS Catalina (10.15)

Mac Studio M1 Max, RAM 64 GB, 1TB Drive, OSX 12.x/13.x and Windows 10 (VM)
DAW: Fender Studio Pro 8, Presonus Studio One Pro 7
DTX Express III (Extreme triggers), Nektar LX88
OWC Thunderbay Mini (4 X 1TB Sata SSD), Express 4M2 (4 X 2TB M.2 SSD), Envoy Express (1TB M.2 SSD)
Presonus Quantum, Faderport & Faderport 8
Black Lion Sparrow Mk2 A/D, FMR-RNP-RNC, MIDI Xpress 128, BM5A, KRK VXT4, Equator D5
2020 Macbook Pro 16GB RAM, 512GB SSD Audio(mobile rig)

1

Thanked by: Shootie

[Shootie]

Thanks for that, Brad. You’re always fantastic with the Studio One support here as well. Cheers.

EZD3 Tutorials | EZBass Tutorials | Toontrack themed FB Group | Toontrack themed Discord Group

1

Thanked by: Brad

[Author]

Replies