MTC in on stand alone

[john krummrich]

As a request can we get MTC or Midi sync for the stand alone.

I can provide my case use if needed but that pretty much sums it up

thank you

Superior Drummer 3 version: 3.3.5
Operating system: Windows 11

Topic

[Ken]

OK, I am curious,

If it is what I think you’re thinking of doing, I can see why. Right now I am using a programmable keypad that I bought on Amazon. It is application aware. The only problem with that is if you switch to another application, you lose control of SD3

Superior Drummer 3 version: 3.3.5
Operating system: Windows 10

Cheers Ken
SD 3.3.6 on Windows 10 | Cubase 11 Pro DAW
expansions : N.Y.Avitar | Latin percussion
Yamaha multi 12 | DTX 450k | Trigger IO (x2)
Super stupid fast computer with i9 and 18 speed double clutch gearbox
5. Audio interfaces.

[john krummrich]

Thanks for the reply.

I have a large and complex setup. I have over 100 inputs in hardware. Behringer wing, x32 rack and 2 soundgrid servers.

I like to record my e drum parts to SD3. midi editing of drum parts is so much faster for SD3 parts in SD3. Mainly  because all the articulations show up on the grid. And change with every kit almost.  I can get multiple outs if I run it inside of Nuendo but that is multiple outs within Nuendo. And it takes a lot of workarounds to get individual outs to my mix setup.at least as far as I know, For now I take the edited MIDI from SD3 put it it Nuendo and send it to SD3 over rtpMIDI.

I have 7 different computers running and like to use SD3 as a kind of tape meschine. 2 Nuendo setups. Dolby Atmos renderer, Wwise, unreal engine and Davinci resolve. I have dedicated systems for all. I send MTC and time code all over the place and  just wish SD3 would take it in stand alone. Hope this makes  some kind of since. It does show I am crazy.

Superior Drummer 3 version: 3.3.5
Operating system: Windows 11

• This post was modified 2 years, 6 months ago by john krummrich.

[Ken]

Hi John

And I thought I was Nuts

I was poking the bear a bit with my initial response, in that most folks that I know of, only run on one computer and …”MTC” means ???

:Mobile Terminated Call : MIDI Time Code : Missile Test Center…. Etc. Etc. Etc. (over 50 definitions for the acronym”MTC”)

I Agree That MTC would be an asset to your case for sure.

In My case I would like the same as I could run stand alone on my Roland 1610 and Cubase on my Moto interface.

On A different note, how do I create a new topic on this forum? Can’t find a button to click on

Cheers

Ken

Superior Drummer 3 version: 3.3.5
Operating system: Windows 10

Cheers Ken
SD 3.3.6 on Windows 10 | Cubase 11 Pro DAW
expansions : N.Y.Avitar | Latin percussion
Yamaha multi 12 | DTX 450k | Trigger IO (x2)
Super stupid fast computer with i9 and 18 speed double clutch gearbox
5. Audio interfaces.

[Brad]

Ken wrote:

Hi John

And I thought I was Nuts

I was poking the bear a bit with my initial response, in that most folks that I know of, only run on one computer and …”MTC” means ???

:Mobile Terminated Call : MIDI Time Code : Missile Test Center…. Etc. Etc. Etc. (over 50 definitions for the acronym”MTC”)

I Agree That MTC would be an asset to your case for sure.

In My case I would like the same as I could run stand alone on my Roland 1610 and Cubase on my Moto interface.

On A different note, how do I create a new topic on this forum? Can’t find a button to click on

Cheers

Ken

Superior Drummer 3 version: 3.3.5
Operating system: Windows 10

Hey Ken

At the bottom of the sub category for each product, “Create New Topic…”

Mac Studio M1 Max, RAM 64 GB, 1TB Drive, OSX 12.x/13.x and Windows 10 (VM)
DAW: Studio One Pro (always up to date)
DTX Express III (Extreme triggers), Nektar LX88
OWC Thunderbay Mini (4 X 1TB Sata SSD), Express 4M2 (4 X 2TB M.2 SSD), Envoy Express (1TB M.2 SSD)
Presonus Quantum, Faderport & Faderport 8
Black Lion Sparrow Mk2 A/D, FMR-RNP-RNC, MIDI Xpress 128, BM5A, KRK VXT4, Equator D5
2020 Macbook Pro 16GB RAM, 512GB SSD Audio(mobile rig)

[Ken]

i Have been looking for weeks. THANK YOU so much.

I have an issue with SD3 in that in “stand alone” mode, adjusting the media controls on the KB OR my “Vaydeer” media controller causes the cursor to jump around in SD3.

Again Thankyou

Cheers Ken

Superior Drummer 3 version: 3.3.5
Operating system: Windows 10

Cheers Ken
SD 3.3.6 on Windows 10 | Cubase 11 Pro DAW
expansions : N.Y.Avitar | Latin percussion
Yamaha multi 12 | DTX 450k | Trigger IO (x2)
Super stupid fast computer with i9 and 18 speed double clutch gearbox
5. Audio interfaces.

[Author]

Replies