Missing cymbal sounds SD3

[Tom Martini]

Hi, I’ve tried this in two different DAW’s (Studio One 6 and Pro Tools Studio) and Stand alone as well. When I try to swap out a cymbal and replace it with one from another SDX or do a search for one and try to preview a sound to use it, it can replace it in the kit but it removes the sound. I’ve tried looking within the mixer for a channel it may reroute to but still no sound then if I try to put back the original one still no sound. It only seems to happen to cymbals and not the drums. I’ve tried unintalling SD3 and reinstall and still , no sound. I’ve had SD3 working 100% until I tried this. The kit i was using is in the main SD3, Bob Rock Kit 1 China cymbal reaplce. Anyone know a fix or cause for this? I’m stumped as to why this started. Thanks

Superior Drummer 3 version: 3.3.3
Operating system: Windows 10

Windows 11
Dell XPS 8940
32GB ram i9-10 Core
Focusrite 18i20 Scarlett +
Focusrite Octo Pre MK II for 36 channels in
Protools Studio / Studio One 6.5 Artist

• This post was modified 2 years, 11 months ago by Tom Martini.
  Reason: added Daw's

Topic

[Tom Martini]

Well I think i’ve figured it out. On some kits there are two OH mics, one is a OH cond, and the other is OH Dynamic. I repointed the replaced cymbal to the Dynamic and it has sound so I guess I can’t use OH Cond with some pieces. I’ve never noticed this prior to trying to switch out a china before. I added a channel and just pointed the output to it and now can hear the sound then just adjust bleed ot the other OH. Hope this helps others.

Windows 11
Dell XPS 8940
32GB ram i9-10 Core
Focusrite 18i20 Scarlett +
Focusrite Octo Pre MK II for 36 channels in
Protools Studio / Studio One 6.5 Artist

[Author]

Replies