Low Volume Audio

[notstewart]

I’m once again having trouble with low volume drum tracks after bouncing down to audio tracks. Support has helped with this in the past, but I can’t find any record of the back and forth conversation in my email account. Is there a way to search the toontrack website for this? It didn’t take place on the forum.

 

thanks,

Paul

Superior Drummer 3 version: 3.4.2
Operating system: Windows 10

Samplitude Pro X3 Suite, SD 3, Tascam UH7000

Topic

[drumjack52]

Did you file a bug report with Toontrack? If so you may be able to find it but if it was via email then there’s no way to find it here.

That being said check the velocity of the hits going to SD3. Also the velocity curve in SD3. Where are you doing the mixing – in the SD3 mixer or your daw? If in the mixer check your levels there. If in your daw check there and make sure you’re not over-compressing things. Also check make-up gain on any compression you’re using.

Jack
aka musicman691 on other forums
Superior Drummer 3.4.1
Area 33 1.0.0
Death and Darkness 1.0.1
PT 2021.6
OSX 10.13.6
3.46 GHz hex core 2012 MacPro 48 gig ram

[notstewart]

Thanks Jack!
I previously filed a report directly to support so I can’t find any email conversations.

As it turns out, this was an easy fix similar to the last time.
The verses of the song were low volume, but the chorus was fine.

A complete newbie error on my part.
The verses were side stick while the chorus was centre hit.

I looked everywhere else except what should have been my “first step”…opening the snare.

Thanks for your help, maybe this post will benefit someone new to SD3.

Paul

Samplitude Pro X3 Suite, SD 3, Tascam UH7000

[drumjack52]

Good that you’re sorted now.

Jack
aka musicman691 on other forums
Superior Drummer 3.4.1
Area 33 1.0.0
Death and Darkness 1.0.1
PT 2021.6
OSX 10.13.6
3.46 GHz hex core 2012 MacPro 48 gig ram

[Author]

Replies