No products in the cart.
If I load the Hitmaker default (bought this yesterday) and play a groove (“Every King’s Breath”). The kick and snare are a lot lower in volume compared to the rest of the kit and also compared with other kits included in Superior drummer 3.
This is just my first quick test and I haven’t checked out all of the stuff. But the first default kit is like this.
And then I change to Toontrack “Almost Dry” and then the kick is low but the snare strong. It’s actually a huge difference in both of these (maybe in other kits as well, but I just tried those two now).
Is there something wrong with my settings or is this something someone else experienced?
I’ve attached a mp3 file with a 2 bar groove (the groove is included in the Hitmaker SDX) with the sound from the EZ Drummer 2 Modern default kit. And then the same 2 bar groove with the Hitmaker default kit.
And bar 5 is a fill (from the Hitmaker midi grooves) with the old Modern kit. And bar 6 is the same fill with the Hitmaker default kit. You can hear the last tom is way much louder than the rest of the kit.
Check the mixer levels.
Create your own pattern with all notes the same velocity and see what happens there.
Jack
aka musicman691 on other forums
Superior Drummer 3.4.0
Area 33 1.0.0
Death and Darkness 1.0.1
PT 2021.6
OSX 10.13.6
3.46 GHz hex core 2012 MacPro 48 gig ram
Yes, I haven’t touched the levels. They are all default. But a huge difference when I switch kits.
And the pattern I attached is the same pattern just played on different kits. Same velocity and everything.
Does the Padgham sound ok for you?
Did you do a full or partial installation?
Damian Blunt - Toontrack
Quality Assurance
Betatesting
It definitely should not sound like that. I would recommend going to the Hitmaker SDX in the Product Manager and selecting verify/download again from the drop down and then re-installing.
Damian Blunt - Toontrack
Quality Assurance
Betatesting
Thanks a lot. Actually when I did go to the Product Manager it looks like it hadn’t completed the full installation. So I did that now. Hope that one will work now. That was probably the reason. Not sure why it didn’t complete the installation process. But it’s working in the background now.
🙂
No products in the cart.