Logic – bounce multiple midi tracks for mixing

[ChadwickDunderc0ck]

Simple question. A little new but I would like to bounce each midi channel from SD3 to Logic as a group. Is this possible? Ie kick , high, toms, cymbals etc…

 

thx

Superior Drummer 3 version: 3.1.4
Operating system: macOS Catalina (10.15)

Topic

[John]

BEST ANSWER

Hi,

if you route the groups to separate outputs in the SD3 mixer, this is what you will get.

If you use ‘Bounce Output Channels’ and Bounce from the SD3 Track, each Mixer output will be a Stereo file.

 

BR,
John

John Rammelt - Toontrack
Technical Advisor

[Bear-Faced Cow]

It is probably best to caveat this: if you are using one of the presets that had processing on channel 1/2, you will want to recreate this bus in Logic (disable or remove the plug-ins on SD3’s output channel) and route your bounces into it, as your bounce will probably not sound the same as the original preset. Copying the plug-ins to each output channel won’t achieve the desired result, in case you may have thought that, as you are not treating the mix as a whole. Instead, it would sound unnatural and somewhat disjointed.

jord

---

Jordan L. Chilcott

Web Site: https://jordanchilcottmusic.com/

[Author]

Replies