Load project at startup

EZdrummer Help
Viewing 3 replies - 1 through 3 (of 3 total)
  • Scott
    Moderator

    Check the EZD3 manual link below:

    https://www.toontrack.com/manual/ezdrummer-3/9/9-1-the-file-menu

    Set Current to Default Project…

    Scott Sibley - Toontrack
    Technical Advisor

    2

    Thanked by: hneel and Shootie
    hneel
    Participant

    OK, but the manual also says “Note that Set Current to Default Project does not save the E-Drums settings, as opposed to Save As that does save them.”

    In my case I have changed some midi settings and velocity curves, and I don’t see those changed settings when I restart the program.

    Brad
    Participant
    BEST ANSWER

    OK, but the manual also says “Note that Set Current to Default Project does not save the E-Drums settings, as opposed to Save As that does save them.”

    In my case I have changed some midi settings and velocity curves, and I don’t see those changed settings when I restart the program.

    Hi there,

    Under Settings > E-Drums MIDI/in select your custom preset from the preset menu and then select “Set Current State to Default” from the same menu.

    https://www.toontrack.com/manual/ezdrummer-3/9/9-4-the-settings-menu/#9-4-7-e-drums-settings


    EZdrummer version: 3.0.6
    Operating system: macOS Ventura (13)

    Mac Studio M1 Max, RAM 64 GB, 1TB Drive, OSX 12.x/13.x and Windows 10 (VM)
    DAW: Studio One Pro (always up to date)
    DTX Express III (Extreme triggers), Nektar LX88
    OWC Thunderbay Mini (4 X 1TB Sata SSD), Express 4M2 (4 X 2TB M.2 SSD), Envoy Express (1TB M.2 SSD)
    Presonus Quantum, Faderport & Faderport 8
    Black Lion Sparrow Mk2 A/D, FMR-RNP-RNC, MIDI Xpress 128, BM5A, KRK VXT4, Equator D5
    2020 Macbook Pro 16GB RAM, 512GB SSD Audio(mobile rig)

Viewing 3 replies - 1 through 3 (of 3 total)

No products in the cart.

×