Per the following video, you will see that when I am hitting my hit hat pedal, it’s triggering a crash bow also.
If I check midi mapping, it shows number 31 and says ‘not loaded’. why is this happening? There is no problem like this directly on the Strike module. Only in SD3.
The hi hat is not touching any activated pads so I can’t see how it would be cross triggering especially since again the cymbal being triggered is not even mapped on my kit. Might this be a new meaning of “ghost note”? lol
My first thing would be to record the midi while doing this and see what notes are actually being transmitted from the strike. Find the one triggering the crash and then remove it from the crash mapping. My first step is always to examine the actual recorded midi first.
SD3 with older sdx,s plus Rooms of Hansa and Death & Darkness. Cubase and wavelab current versions. Roland TD50x using all trigger inputs for triggering SD3 only. Windows 11 computer. Various keyboards and outboard gear as well as VST instruments. Acoustic drums: Yamaha 9000 natural wood and Pearl masters. Various snare drums. RME BabyFace Pro FS and Adam A7X monitors
My first thing would be to record the midi while doing this and see what notes are actually being transmitted from the strike. Find the one triggering the crash and then remove it from the crash mapping. My first step is always to examine the actual recorded midi first.
How do I remove it from the crash mapping? I’m still pretty new to this so forgive my ignoramous. Thanks
In the edrum section select the cymbal from the left menu and the menu just to the right then allows you to delete. I would try explain better but I’m writing this from my iPad and not in front of my computer with sd3 on it
SD3 with older sdx,s plus Rooms of Hansa and Death & Darkness. Cubase and wavelab current versions. Roland TD50x using all trigger inputs for triggering SD3 only. Windows 11 computer. Various keyboards and outboard gear as well as VST instruments. Acoustic drums: Yamaha 9000 natural wood and Pearl masters. Various snare drums. RME BabyFace Pro FS and Adam A7X monitors
Thanks! Was able to clear the crash via midi settings but had to do it on every project I saved. I thought the midi mapping was across the board? Like removing it once would be all that was needed but apparently not.
Save the edrum preset. I use drum presets and not projects. If you still want to use projects then save the edrum preset. Load each project and then load the edrum preset you saved. Then save the project again. That will take hardly any time. A project saves everything. A preset will keep whatever edrum preset is already loaded. Make sure you save the default project with your edrum midi preset.
SD3 with older sdx,s plus Rooms of Hansa and Death & Darkness. Cubase and wavelab current versions. Roland TD50x using all trigger inputs for triggering SD3 only. Windows 11 computer. Various keyboards and outboard gear as well as VST instruments. Acoustic drums: Yamaha 9000 natural wood and Pearl masters. Various snare drums. RME BabyFace Pro FS and Adam A7X monitors
Save the edrum preset. I use drum presets and not projects. If you still want to use projects then save the edrum preset. Load each project and then load the edrum preset you saved. Then save the project again. That will take hardly any time. A project saves everything. A preset will keep whatever edrum preset is already loaded. Make sure you save the default project with your edrum midi preset.
This is where I am still confused. So exactly how do I do this? I have gotten in such a habit of saving everything as a project. How do I save as a preset? What is the difference? I didn’t see an option for just saving presets. I assumed saving a project and saving presets was the same thing. Apparently not. lol
Presets are to the right hand side and is where all the presets are that are provided with sd3. There is also a user preset folder. I think it’s all explained in the manual with the differences. With presets you have different options of what you want to load. A project may have recorded midi with it and macros etc. just make sure you save a edrum preset so you can open it to get the mapping you want.
SD3 with older sdx,s plus Rooms of Hansa and Death & Darkness. Cubase and wavelab current versions. Roland TD50x using all trigger inputs for triggering SD3 only. Windows 11 computer. Various keyboards and outboard gear as well as VST instruments. Acoustic drums: Yamaha 9000 natural wood and Pearl masters. Various snare drums. RME BabyFace Pro FS and Adam A7X monitors
