EZmix as stand alone.

[Gerry_4]

In order to get the different amps and cabinets sounds.Is it possible to use EZmix as a stand alone when playing the guitar for example.
Thank you.

Gerry

Topic

[Scott]

Yes, there is a Standalone version included with EZmix2.

Scott Sibley - Toontrack
Technical Advisor

[Gerry_4]

Thank you. But how do I get to it.
I verified and I cannot see it as an item in the menu.

Gerry

[Scott]

Give me some system details. OS, what version of EZmix2, etc.

Scott Sibley - Toontrack
Technical Advisor

[Gerry_4]

OS—-Windows 10
DAW—Sonar X3
EZMix 2 plug in version 2.1.1 build 10974
Pre Sonus —Audiobox USB

Gerry

[Scott]

After installation, there isn’t an EZmix2 shortcut on your desktop? It isn’t in Programs in the Start menu?

Scott Sibley - Toontrack
Technical Advisor

[Gerry_4]

.Basically, you are telling me that opening the EZMix and plugging my guitar in my audio box, everything should work fine. Right.
Thank you.
Gerry

[Scott]

If you make sure to set the device settings in EZmix2 to your Audiobox device and the latency is adjusted to a low setting, then yes. Please see the EZMix2 manual for details on how to set up for standalone operation.

Scott Sibley - Toontrack
Technical Advisor

[Gerry_4]

I plugged in everything, set up the latency at 128. I get sound but with a lot of interference/issing.
In the manual, on page 10 paragraph 2 it says to ” see instructions later in the manual with respect to operating standalone version”….well I cannot find the info.
Is there by any chance an other manual where that info would show?

Thank you

Gerry

[Gerry_4]

I plugged in everything, set up the latency at 128. I get sound but with a lot of interference/issing.
In the manual, on page 10 paragraph 2 it says to ” see instructions later in the manual with respect to operating standalone version”….well I cannot find the info.
Is there by any chance an other manual where that info would show?

Thank you

Gerry

[Scott]

Is there any particular presets where you hear the interference? All of them?

Scott Sibley - Toontrack
Technical Advisor

[Gerry_4]

On most all of them.
I have to play with both the input and output knobs at the bottom of the main screen to reduce the interference
but it also affects sound and volume.

Gerry

[Scott]

Does it help to adjust the input level of your Audiobox? Do the presets sound better or worse if you record a dry track and apply the preset after?

Scott Sibley - Toontrack
Technical Advisor

[Gerry_4]

There is no problem when applying the presets after having recorded a track.
The problem exists only when using in standalone mode.

Gerry

[Scott]

In that case, the only thing I can think of is a bad cable or some issue with the Audiobox.

Scott Sibley - Toontrack
Technical Advisor

[Gerry_4]

Thank you.

Gerry

[Author]

Replies