EZdrummer 3 – Multichannel output not working in 3.1.0

[Tobias Just]

Hey there,

I just updated my EZdrummer 3.0.6 to 3.1.0 and noticed the multichannel output is not working any longer. I can select to output the EZD3 mixer channels to “Out 1/2”, “Out 3/4” and so on, but I am not getting any audio inside my DAW when setting these outputs as channel inputs on my DAW mixer. It workes that way using EZdrummer 1, 2 and 3 (3.0.6).

There is just not signal being passed to the channel inputs it seems.

I’m using Samplitude Pro X6 Suite and Windows 10.

Is this a known issue?

Thanks!

 

EZdrummer version: 3.1.0
Operating system: Windows 10

Topic

[Mick Avoidant]

Have you tried reassigning the channels in Samplitude?

[Tobias Just]

I tried just in case, but unfortunately doesn’t work either.

The only working output in EZD3 3.1.0 seems to be Out 1/2. It doesn’t matter whether I let Samplitude do the routing for me, or doing it manually – Out 3/4 to 31/32 won’t work. When I revert back to 3.0.6, everything is fine again.

Edit: Just tried loading factory settings on Samplitude Pro X6 and even reinstalling it – same issue. Also reinstalled EZD3 multiple times.

Edit #2: I now downloaded and tested the Samplitude Pro X8 trial version and there everything works again. Seems like EZD3 update 3.1.0 changed something which leads to provlems with Samplitude X6 only? I compared the settings and there are no differences I can spot. However, X8 change log states that VST3 compatibilty has been improved compared to X6 and X7. So now I can either stick to EZD3 3.0.6, or spend a lot of money to upgrade to Samplitude X8…

I’m really hoping Toontrack support sees this / some user got a helpful hint to make EZD 3.1.0 work with Samplitude X6 again.

 

Cheers

• The post has been modified 2 times, last modified 4 months, 2 weeks ago by Tobias Just.

[Brad]

Tobias Just wrote:

I tried just in case, but unfortunately doesn’t work either.

The only working output in EZD3 3.1.0 seems to be Out 1/2. It doesn’t matter whether I let Samplitude do the routing for me, or doing it manually – Out 3/4 to 31/32 won’t work. When I revert back to 3.0.6, everything is fine again.

Edit: Just tried loading factory settings on Samplitude Pro X6 and even reinstalling it – same issue. Also reinstalled EZD3 multiple times.

Edit #2: I now downloaded and tested the Samplitude Pro X8 trial version and there everything works again. Seems like EZD3 update 3.1.0 changed something which leads to provlems with Samplitude X6 only? I compared the settings and there are no differences I can spot. However, X8 change log states that VST3 compatibilty has been improved compared to X6 and X7. So now I can either stick to EZD3 3.0.6, or spend a lot of money to upgrade to Samplitude X8…

I’m really hoping Toontrack support sees this / some user got a helpful hint to make EZD 3.1.0 work with Samplitude X6 again.

 

Cheers

• The post has been modified 4 months, 2 weeks ago by Tobias Just"> 2 times, last modified 4 months, 2 weeks ago by Tobias Just.

Try putting a trouble ticket in via the FAQ page.

EZdrummer version: 3.1.0
Operating system: macOS Sequoia (15)

Mac Studio M1 Max, RAM 64 GB, 1TB Drive, OSX 12.x/13.x and Windows 10 (VM)
DAW: Studio One Pro (always up to date)
DTX Express III (Extreme triggers), Nektar LX88
OWC Thunderbay Mini (4 X 1TB Sata SSD), Express 4M2 (4 X 2TB M.2 SSD), Envoy Express (1TB M.2 SSD)
Presonus Quantum, Faderport & Faderport 8
Black Lion Sparrow Mk2 A/D, FMR-RNP-RNC, MIDI Xpress 128, BM5A, KRK VXT4, Equator D5
2020 Macbook Pro 16GB RAM, 512GB SSD Audio(mobile rig)

[Author]

Replies