EZDrummer 3 – custom made drum kits without preset reverbs?

[BradleyHart]

I am using a Roland TD27 to trigger EZD 3 for recording.

I’ve starting working on building a custom drum kit with parts from the different rooms – using the cymbals from the tight room and other drums from the main and bright rooms – and it sounds like the preset reverbs are on the drums.

I know that in the right hand menu you can pick “original mix” for the preset kits…but if you’re putting a custom kit together from components, is there a way to bypass or turn off the reverbs/eq on the individual instruments?

 

Topic

[BradleyHart]

Digging a little deeper into the mixer section…I think maybe what I’m experiencing is not a reverb setting but actually just the “ambience” and “crush” microphones, if that makes sense…

[BradleyHart]

Actually, this does not seem to be the case – with all the room mics off, just the close mic on the snare, there is definitely a reverb on the sample. Don’t know how to get rid of that…

[Bear-Faced Cow]

Which preset? Are you selecting one that is specifically dry? Better yet, are you using the kits recorded in the  tight  room?

jord

---

Jordan L. Chilcott

Web Site: https://jordanchilcottmusic.com/

• This post was modified 2 years, 8 months ago by Bear-Faced Cow.

1

Thanked by: BradleyHart

[Damian Blunt]

There is no reverb recorded on the close mics in the EZdrummer 3 Core library.

Could you have selected a preset that uses reverb (these would be labelled so) or could you have a reverb active in your DAW or audio interface?

Damian Blunt - Toontrack
Quality Assurance
Betatesting

[BradleyHart]

I was building a kit from instruments from the 3 different rooms….bass drum and floor toms from main room, snare and rack tom from bright room and cymbals from the tight room. It really sounds like the snare, for instance, even with just the close mic soloed, sounds like it has processing on it.  Maybe I’m missing something.

[BradleyHart]

So, even if I’m mixing and matching instruments from the 3 rooms to create a custom kit…if I just send the close mics to a producer to mix, those sounds are going to be dry, with no processing on them?

[Author]

Replies