EZD2 routing question

[Davide Pagano]

Hi,

in EZD2 the number of channels available in the mixer changes accordingly to the preset. Now, EZD2 supports 16 out. I am wonder how can I freely assign each piece to different outputs. For example, how can I assign the toms to different channels as they are merged into a single mixer channel?

Thanks.

Topic

[John]

Hi,

assigning each kit piece to a separate output would be a Superior 2 feature, not possible in EZdrummer.

John Rammelt - Toontrack
Technical Advisor

[Davide Pagano]

@John said:

Hi,

assigning each kit piece to a separate output would be a Superior 2 feature, not possible in EZdrummer.

no wait. In EZD1 each tom had a different mixer channel so you could route them to different outputs. what’s going on with EZD2?

[John]

Well, yes in the EZD1 mixer Presets, you can. Or rather – it’s both EZX dependent and Mixer Preset dependent.
If you e.g. load the Basic EZdrummer 1 POP/ROCK Mixer Preset, you have separate faders for the 2 Rack Toms and the Floor Tom. These can then be routed to separate outputs. Since you can load kit pieces from any EZX, you can still use the EZdrummer 2 sounds, even though the Mixer Presets for them does not have the Toms on separate faders.

What I meant in the post above is that freely routing any kit piece to a separate output is a Superior 2 feature.
Did I explain it better now or do you want me to elaborate?

John Rammelt - Toontrack
Technical Advisor

[Davide Pagano]

@John said:

Well, yes in the EZD1 mixer Presets, you can. Or rather – it’s both EZX dependent and Mixer Preset dependent.
If you e.g. load the Basic EZdrummer 1 POP/ROCK Mixer Preset, you have separate faders for the 2 Rack Toms and the Floor Tom. These can then be routed to separate outputs. Since you can load kit pieces from any EZX, you can still use the EZdrummer 2 sounds, even though the Mixer Presets for them does not have the Toms on separate faders.

What I meant in the post above is that freely routing any kit piece to a separate output is a Superior 2 feature.
Did I explain it better now or do you want me to elaborate?

I got it. thanks. Lucky I have SD as well, so I am waiting for the update to be able to use the EZD2 libraries…

[Author]

Replies