EZ Drummer and Sonar 7 Producer problems

EZdrummer Help
Viewing 14 replies - 1 through 14 (of 14 total)
  • Rogue
    Moderator

    hi – is Sonar the 64 bit version? if so you need to install the 64 bit version of your Toontrack programs. Make sure to install them in your preferred VST folder or alternatively point Sonar to the default path for our installers:

    C:Program Files (x86)VSTPlugins for the 32 bit
    C:Program FilesVSTPlugins for the 64 bit

    Rogue Marechal - Toontrack
    Configuration Manager

    1

    Thanked by: Gerry Lane
    Gerry Lane
    Participant

    Hi RM.
    I just saw your answer…..thank you very much for that.
    I will try what you have suggested.
    Take care.
    Gerry.
     

    Gerry Lane

    Gerry Lane
    Participant

    Hi Rm.
    I did all that you suggested…..and I got it to work….thanks a million.
    Now, the problem I have is….Ez Drummer plays fine for a while but every so often it just freezes up and I have to shut down Sonar and re-open it again to get it going. It also happens when I try to drag and drop the patterns into Sonar!!!
    What could be causing this and how can I sort it out……any ideas RM???
    Thank you for your time.
     
    Gerry.

    Gerry Lane

    John
    Moderator

    Are you 100% sure you are using the 64-bit version? Does it read (64-bit) right next to the 1.2.1 version number in the plugin interface?

    John Rammelt - Toontrack
    Technical Advisor

    Gerry Lane
    Participant

    Hi John.
    Thank you for getting back to me.
    I think that you are right….it does not say 64bit on the plugin interface.
    One of the Toontrack tech people told me to download this : https://www.toontrack.com/downloadfile.asp?id=334535&prod=7&file=EZdrummer_WIN_121.zip&upid=186     EZdrummer 1.2.1 for Windows XP or newer 2010-07-05   22, 8 MB
    So, I’m guessing that it is not the 64bit version. Where can I download that john?
    Thanks again.

    Gerry Lane

    Dave Modisette
    Participant

    Your products page is where you would find the 64 bit download.

    Dave Modisette www.gatortraks.com www.plasticsamerica.com http://www.gatortraks.com/forum

    Gerry Lane
    Participant

    The only download for EZ Drummer PC version on my product page Dave is this:  EZdrummer WIN 121.zip  (which I already downloaded and apparently is not the 64bit version)

    Gerry Lane

    Scott
    Moderator

    There are 2 installers in the ‘EZdrummer_WIN_121.zip’ download. One named ‘EZdrummer 32 bit Update.exe’ and one named ‘EZdrummer 64 bit Update.exe’. In addition, there is the all important ‘Important ReadMe.rtf’.

    Scott Sibley - Toontrack
    Technical Advisor

    Gerry Lane
    Participant

    Hi Scott.
    Yes, I did read the ‘Important ReadMe.rtf document.
    I actually uninstalled all my Toontracks stuff and reinstalled EZ Drummer again…(from the disc) in my VST folder. Then I installed the 32bit update…(like it said on the ‘Important ReadMe.rtf document….and then I installed the 64bit update….it still dosent say 64bit on the plugin interface but…when I open up Sonar…it does say 64bit…..and, still the same problem….everything just freezes up. So, at this stage I’m about ready to just forget about the whole thing…..I’ve lost enough time on it…..(and I haven’t even started on Superior Drummer yet!!!)

    Gerry Lane

    Scott
    Moderator

    In Sonar, do you need to set a path to the 64-bit plugin folder where you installed the 64-bit version of EZdrummer?

    Scott Sibley - Toontrack
    Technical Advisor

    Gerry Lane
    Participant

    Sonar picked it up Scott no problem….it all opens up ok and if I click on a drum…snare, tom etc…it sound good….I can audition the grooves but after a while, it just freezes up. If I drag the groove into Sonar….and try to play it…NOTHING. I can see the groove but no sound and then it just freezes up as well!!

    Gerry Lane

    Rogue
    Moderator

    Are you using Sonar 7? if so then one point I need to make is that it would not have been tested under Windows 7 and I certainly expect Cakewalk to have improved their 64 bit driver support in the last 18 months i.e Sonar 8.x

    Then again Sonar might not be at fault but your Audio driver is – although that would not explain the drag and drop problem.

    … I’m still confused as to whether you are looking at the 64 bit version of EZdrummer though:

    it still dosent say 64bit on the plugin interface but…when I open up Sonar…it does say 64bit

    what do you mean by this? are you using Toontrack solo and dragging from it into Sonar? if so that’s not how it works. Please clarify.

    Rogue Marechal - Toontrack
    Configuration Manager

    Gerry Lane
    Participant

    Yes, I’m using Sonar 7 Producer but only for my Toontracks stuff…..I use another program for recording.
    I am using the Line6 UX 2 soundcard and I have updated all my drivers on that. The PC is new….7Gigs of ram. I will check for improved drivers for Sonar.
    As you probably read above RM…I did a re-install of everything…..first from the original disc, then the 32bit upgrade and finally the 64bit upgrade….(but it does not read (64-bit) right next to the 1.2.1 version number in the plugin interface!!)
    I open EZ Drummer inside Sonar and drag the patterns in from there…..the pattern goes in perfectly….I do NOT drag the the patterns in just from Toontracks Solo software. 
    Thanks for the help RM……I really am close to just getting rid of it all and look for an alternative….I’ve lost so much time on this.

    Gerry Lane

    Rogue
    Moderator

    again, as pointed by Scott, In Sonar, you need to set a path to the 64-bit plugin folder where you installed the 64-bit version of EZdrummer. By default that means C:Program FilesVSTPlugInsToontrack64bit, although you were given the opportunity to directly install in your Cakewalk folder during the installation process.

    … the bottom line is that if the interface does not say ’64-bit’ in the bottom right corner of the EZdrummer interface, you are using the 32 bit through the ‘bitbridge’, a 100% UNsupported environment.

    Rogue Marechal - Toontrack
    Configuration Manager

Viewing 14 replies - 1 through 14 (of 14 total)

No products in the cart.

×