EZ Drummer 3 with Roland TD-10 Snare issue

[Omar Nepomuceno]

Hi,

I’m new to using EZ Drummer with my old Roland TD-10 kit. I selected the my Roland kit under Settings/E-Drums/MIDI In …/Preset. The issue I have is that the snare drum is really sensitive. If you tap the stick on the side of the shell it triggers a center hit. Side stick doesn’t work. It also triggers a center hit.

I tried other swapped the Roland snare with on of the Roland toms and it has the same issue. I tried a different cable without luck. I reset my Roland TD-10 back to factory defaults but that hasn’t fixes the issue.

I also tested the TD-10 stock sounds (without EZ Drummer)  just to make sure there wasn’t anything weird going on, and it works perfectly fine. Sidestick works and the side of the drum doesn’t trigger.

Any ideas?

Thanks

EZdrummer version: 3.0.6
Operating system: macOS Sonoma (14)

Topic

[Mick Avoidant]

Have you tried Learn in Settings – > ekits – > Mapping?

[ROBERT]

pad settings also, check your sensitivity and the other parameters.

[Omar Nepomuceno]

Sorry the delay in replying. I made sure my Roland TD-10 was selected. But what I noticed that the snare mappings seem to be missing. See the screenshot below:

Could this be the issue? How would I reset it back to default?

EZdrummer version: 3.0.6
Operating system: macOS Sonoma (14)

• The post has been modified 2 times, last modified 10 months ago by Omar Nepomuceno.

[Mick Avoidant]

Click on Learn and hit the snare

[Omar Nepomuceno]

I tried using the Learn function but everything either gets assigned to Note Number 38 or 40.

For example I click on Center and then Learn and hit the middle of the snare. Center gets assigned to 38. I click on Rimshot and then Learn. Perform a rimshot and 38 moves to Rimshot and Center now is blank.

Same issue with Sidestick and Rim Only getting assigned to 40.

[Mick Avoidant]

Omar Nepomuceno wrote:

I tried using the Learn function but everything either gets assigned to Note Number 38 or 40.

For example I click on Center and then Learn and hit the middle of the snare. Center gets assigned to 38. I click on Rimshot and then Learn. Perform a rimshot and 38 moves to Rimshot and Center now is blank.

Same issue with Sidestick and Rim Only getting assigned to 40.

This might help https://youtu.be/68IVzRIpcM4?si=VXHxrZKiQf53lHmY

[Bear-Faced Cow]

It sounds like you may be experiencing cross talk in your snare. As was stated earlier, try adjusting your pad sensitivity.

jord

---

Jordan L. Chilcott

Web Site: https://jordanchilcottmusic.com/

[Author]

Replies