icon-toontrack-20tt-20-symbolicon-aiicon-arrangementsicon-arrow-left-1icon-arrow-left-2icon-arrow-left-3icon-arrow-right-1icon-arrow-right-2icon-arrow-right-3icon-automationicon-bleedicon-bounceicon-brushesicon-brushes2icon-campaign-pageicon-circlesClosedicon-cloudCommentsicon-cross-invicon-crossicon-cymbalicon-dislike-1icon-dislike-2Unread topicicon-downloaddrumsicon-drag-dropicon-drumkiticon-drums2icon-drumsticksicon-edrumsicon-electronicTopicicon-envelopeicon-fadersicon-faqForumForumTopic replyicon-futurehiticon-galaxyicon-grid-editoricon-headphonesicon-hihaticon-hot-topicicon-importsamplesicon-information-invicon-informationicon-joystickicon-kickicon-like-1icon-like-2Locked topicicon-macrosicon-massenburgAccountCartSearchicon-microphoneicon-midi-exporticon-midi-searchicon-midi-trackericon-midi-tracksicon-midiicon-mix-channelsicon-mixericon-news-inspirationicon-one-noteicon-percussionicon-percussion2Sticky topicicon-play-1-invicon-play-1icon-play-2-invicon-play-2icon-play-3icon-plus-invicon-plusicon-presetsPrivate topicicon-rawicon-reverseanythingicon-samplesicon-save-drumicon-seamlessicon-settingsicon-shapesicon-snareicon-song-tracksicon-ssdicon-stackicon-tap2findicon-tempoicon-third-partyicon-three-notesicon-tomTopic with best answericon-two-notesicon-usericon-videoicon-workflow

Editing/extending a loop

Product Manager
Viewing 4 replies - 1 through 4 (of 4 total)
  • ScottScott
    Moderator

    Use the Cut Tool to cut at the beginning and end of the 1 measure you want to copy. Put another cut where you want to insert the fill. Slide the measure at the end of that cut out of the way. Then Copy the fill measure. Then Paste it where you want it. Slide the other measure back in place.

    Scott Sibley - Toontrack
    Technical Advisor

    Gary Brody
    Participant

    Tried that. Was able to isolate the bar I want to copy, and establish point at which i want to copy the bar to, but don’t seem to be able to copy and paste it. Figured it should work like every other copy/paste move, not pasting.

    Any other ideas? I’m sure it’s simple and I am juts missing something. Thanks.

    ScottScott
    Moderator

    Are you in a DAW or Standalone? In a DAW Right/click on the groove section and select copy or paste from the menu. If standalone, the regular shortcuts apply Ctrl-C, Ctrl-V.

    Scott Sibley - Toontrack
    Technical Advisor

    Gary Brody
    Participant

    Just got it. I guess the 40th try is the charm 🙂 Thanks for the help.

Viewing 4 replies - 1 through 4 (of 4 total)
×