Bug report SD3 with Metal Foundy and xdrums

[LeanderL]

Hello!

I have a problem with my Metal Foundry library. I created “my” kit in SD2. When loading my Cakewalk by Bandlab project it always loads the kit incorrectly.
This is what it looks like:

My kit uses 6 toms. In SD2 the sixth tom has a tom image. Here the cymbal indicated by the 1 is the tom. I don’t know why it is up there.
Loading my Cakewalk project loads the kit and assigns midi note 49 to the tom which is wrong.
I have to load the kit again in SD3 so it is ok.
When I quit Cakewalk and load my project again, it starts with wrong midi notes again…so I always have to manually load the kit in SD3 to fix this error. Saving the kit with fixed notes does not help…loading the Cakewalk project always leads to wrong midi notes until I manually load the kit in SD3 again although it was loaded with Cakewalk anyway.

Another bug is that when I strike upper cymbal which is my sixth tom…the crash indicated by 2 is visually hit.

By the way, here is my kit in SD2:

Superior Drummer 3 version: 3.3.5
Operating system: Windows 10

SeelenPuls ~ Poetic metal from Austria: SeelenPuls.at
Grummelgnom ~ Sociocritical metal from the forest: Grummelgnom.at

• This post was modified 2 years, 7 months ago by LeanderL.

Topic

[Mark King]

Was it ok in 3.3.4? Asking as I’m wondering if I should hold on updating

SD3 with older sdx,s plus Rooms of Hansa and Death & Darkness. Cubase and wavelab current versions. Roland TD50x using all trigger inputs for triggering SD3 only. Windows 11 computer. Various keyboards and outboard gear as well as VST instruments. Acoustic drums: Yamaha 9000 natural wood and Pearl masters. Various snare drums. RME BabyFace Pro FS and Adam A7X monitors

[LeanderL]

No, the bug has been around for a long time. It is not a big issue as I just have to reload the kit after loading my Cakewalk project…but decided to report it though.

SeelenPuls ~ Poetic metal from Austria: SeelenPuls.at
Grummelgnom ~ Sociocritical metal from the forest: Grummelgnom.at

1

Thanked by: Mark King

[Olof Hermansson]

Hi,

Could you attach the kit preset, please?

Olof Hermansson - Toontrack
Coder

[LeanderL]

Here it is.

SeelenPuls ~ Poetic metal from Austria: SeelenPuls.at
Grummelgnom ~ Sociocritical metal from the forest: Grummelgnom.at

1

Thanked by: Olof Hermansson

[Andrew Payne]

Hi Mark – I would wait if I was you – see my recent post. cheers, Andrew

Andrew Payne wrote:

Thanks for the update. I have some good news and some bad news.

Good news is channel orders are retained with both 3.3.3 user kits I had as well as with 3.3.4 user kits so this has worked.

Unfortunately I have a major issue in that when I make an update and go to save the preset I cannot do this – see error message. See attached screenshots. First is a complicated user kit – it is in Hitmaker and user Toms and Kick from FOR Stone (Sonor kit) – it was saved in 3.3.4.  I was however able to use “save as” and give it another name.

Second example is all within Hitmaker but same issue with saving the preset – and same error message. This was originally saved in 3.3.3 and again I could use “save as” and give it a different name.

Please check this urgently as major issue for me. Thanks , Andrew

Superior Drummer 3 version: 3.3.5
Operating system: Windows 10

Superior Drummer 3 version: 3.3.5
Operating system: Windows 10

Dell Precision 7730, i7 6 Core 2.6 GHz, 128GB RAM, 1TB SSD and 3 x 2TB SSD, Windows 11, Cubase Pro 14, SD3 plus a variety of SDX's and EZX's, Orchestral Percussion, EZBASS, RME BabyFace Pro FS and KRK V4 monitors. Modified Yamaha DTX900, DTXPRESS4 and Edrumin10 triggering SD3. Yamaha pads/cymbals and Roland VH-10 HiHat. PDP Maple acoustic kit for live playing.

1

Thanked by: Mark King

[Olof Hermansson]

Thanks, we’ll investigate.

Olof Hermansson - Toontrack
Coder

[Author]

Replies