No products in the cart.
Hi, I can’t seem to access the surround mics or extra room mics. I have done a full install of these sounds. Am I missing something? How do I access the extra mics?
Thanks
Check to see that they aren’t hidden in the mixer tab. Once visible, click on one of the channels in the mixer tab and either enable the bleed o for all instruments or just the ones you want to hear.
jord
I’ve checked and they are not hidden. Would it have anything to do with the fact that the sounds are installed on an external device as there wasn’t 250gb of space available on my macbook..? That’s all I can think of.
Have you turned on the bleeds as shown in the manual?
Scott Sibley - Toontrack
Technical Advisor
I just tried that now and yes I can load mixer presets which include extra mic options. I thought there was a way I could do this without loading up a mixer preset though? Or is the default setting unless you load up a preset to have one stereo o/h and one stereo room mic?
Hi,
if you start with the Default project and then select a microphone in the mixer that isn’t loaded, e.g. the OH Cond, you can see small ON/OFF buttons in the Properties Box to the right (if it’s hidden, just make it visible).
Enable the Bleed you wish to hear from the microphone in question. Set the instrument levels if you wish to.
BR,
John
John Rammelt - Toontrack
Technical Advisor
I’ve tried that but when I go to select a mic that isn’t loaded, like the o/h condenser, it’s greyed out…?
Actually if I hit the edit visibility button, it shows them all and I can turn them on and off from there
No products in the cart.